Abstract:Purpose Continuum robots modeling, be it from a hard or soft class, is giving rise to several challenges compared with rigid robots. These challenges are mainly due to kinematic redundancy, dynamic nonlinearity and high flexibility. This paper aims initially at designing a hard class of continuum robots, namely, cable-driven continuum robot (CDCR) and equally at developing their kinematic and dynamic models. Design/methodology/approach First, the CDCR prototype is constructed, and its description is made. Second, kinematic models are established based on the constant curvature assumption and inextensible bending section. Third, by using the Lagrange method, the dynamic model is derived under some simplifications and based on the kinematic equations, in which the flexible backbone’s elasticity modulus was identified experimentally. Finally, the static model of the CDCR is also derived based on the dynamic model. Findings Numerical examples are carried out using Matlab software to verify the static and dynamic models. Moreover, the static model is validated by comparing the simulation’s results to the real measurements that have been provided with satisfactory results. Originality/value To reduce the complexity of the dynamic model’s expressions and avoid the numerical singularity when the bending angle is close to zero, some simplifications have been taken, especially for the kinetic energy terms, by using the nonlinear functions approximation. Hence, the main advantage of this analytical-approximate solution is that it can be applied in the bending angle that ranges up to 2p with reasonable errors, unlike the previously proposed techniques. Furthermore, the resulting dynamic model has, to some extent, the proprieties of simplicity, accuracy and fast computation time. Ultimately, the obtained results from the simulations and real measurements demonstrate that the considered CDCR’s static and dynamic models are feasible.

A 3D Static Modeling Method and Experimental Verification of Continuum Robots Based on Pseudo-Rigid Body Theory

Dynamic Modeling and Verification of Continuum Robot Based on Cable Drive.

Statics of Continuum Space Manipulators with Nonconstant Curvature Via Pseudorigid-Body 3R Model

A comprehensive static model of cable-driven multi-section continuum robots considering friction effect

Static Modeling And Analysis Of Continuum Surgical Robots

Dynamics modeling of a 2-DoFs cable-driven continuum robot

Design and Modeling of a Cable-driven Continuum Robot Considering Large Load

A modular approach for dynamic modeling of multisegment continuum robots

Kinematic and Static Analysis and Experimental Study for Dual-arm Continuum Robot

Real-Time Dynamics of Cable-Driven Continuum Robots Considering the Cable Constraint and Friction Effect

An Analytic Method for the Kinematics and Dynamics of A Multiple-Backbone Continuum Robot

Kinematic Analysis and Simulation for Cable-driven Continuum Robot

A Static Model of a Notched Continuum Robot with Non-Constant Curvature for Minimally Invasive Surgery: Base on Taylor Expansion Approach.

Three-dimensional Static and Dynamic Stiffness Analyses of the Cable Driven Parallel Robot with Non-Negligible Cable Mass and Elasticity

Static and dynamic stiffness analyses of cable-driven parallel robots with non-negligible cable mass and elasticity

Static-to-kinematic Modeling and Experimental Validation of Tendon-Driven Quasi Continuum Manipulators with Nonconstant Subsegment Stiffness

General Kinetostatic Modeling and Deformation Analysis of a Two-Module Rod-Driven Continuum Robot with Friction Considered

A Variable Curvature Model for Multi-Backbone Continuum Robots to Account for Inter-Segment Coupling and External Disturbance.

A Novel Contact-aided Continuum Robotic System: Design, Modeling, and Validation

Research on Controllable Stiffness of Redundant Cable-Driven Parallel Robots

Research on Stiffness of Multibackbone Continuum Robot Based on Screw Theory and Euler-Bernoulli Beam