Abstract:With the dramatic requirements of high power and high integrity in field of power devices, the study of novel interconnection materials and packaging methods has been paid an extremely attention. Presently, the most candidates for the chip bonding are Zn-based, Bi-based, noble-metal-based (such as Au-Sn, Au-Ge, Au-Si), nano-metal particles (Ag or Cu nanoparticles) and transient-liquid-phase (TLP) bonding. However, a high bonding temperature and poor ductility for Zn-based solder (more than 420°C) causing irreversible damages or accelerated aging affects to the electronic devices; Bi-based solder alloys are still under way mainly due to their inferior thermal and electrical conductivity as well as poor workability; It's worth noting that nano-silver sintering and TLP bonding technology have been proven to be the potential solutions to the power electronic packaging, because their processing temperatures are relatively low and the produced joints are of high re-melting temperatures. However, Ag is expensive and easy to electromigration, which will influence the stability/reliability of the joints and hinder to universal industry applications. For the TLP bonding, the process to produce full intermetallic compounds (IMCs) is time-consuming, commonly more than 60 min, due to relatively low reaction velocity. To solve the problem of time-consuming of the TLP, an enhanced and low-cost auxiliary energy is necessary. Ultrasonic-assisted soldering has been proven able to solder dissimilar metals at low temperatures within a very short time. In our previous work, a full Cu6Sn5/Cu3Sn IMCs joint through TLP assisted by ultrasound was obtained. Because of the acoustic cavitation and streaming effect created by ultrasonic waves propagating in molten alloys, the atom diffusion and physical-chemical interactions were accelerated at the liquid/solid interfaces. However, a sole IMC joint with single phase has not been fabricated so far. High re-melting temperature joint consisted of nearly sole Ni 3 Sn 4 with a high shear strength of 43.4 MPa was achieved with Sn-24 wt.%Ni by ultrasonic-assisted soldering for 10 s. This rapidly formed intermetallic joint was phase-stable as isothermally aged at 300 °C for 72 h in air and its shear strength was 33.4 MPa due to the Ni 3 Sn 4 grains coarsening. These results demonstrate that the less time-consuming ultrasonic-assisted soldering has wide potentials for high-temperature power electronic packaging.

Ultracompliant Heterogeneous Copper-Tin Nanowire Arrays Making a Supersolder

Electrothermal Cosimulation of 3-D Carbon-Based Heterogeneous Interconnects

Ultrasonic-assisted Soldering of Sn-based Solder Alloys to Form Intermetallic Interconnects for High Temperature Application

Enhanced Thermal Stability of Joints Formed by Ag-Cu Supersaturated Solid-Solution Nanoparticles Paste by In-Situ Cu Nanoprecipitates

Improving Adhesion Strength and Thermal Conductivity of Nanowire Surface Fastener

Research progress on solder thermal interface materials

Micron Sn-Cu Composite Solder for High-Temperature Applications Based on Transient Liquid Phase Bonding

Core-shell Nanowire Based Electrical Surface Fastener Used for Room-Temperature Electronic Packaging Bonding

Laminar Metal Foam: A Soft and Highly Thermally Conductive Thermal Interface Material with a Reliable Joint for Semiconductor Packaging.

Thermal interface material with graphene enhanced sintered copper for high temperature power electronics

Molybdenum copper based ultrathin two-phase heat transport system for high power-density gallium nitride chips

Highly conductive thermal interface materials with vertically aligned graphite-nanoplatelet filler towards: High power density electronic device cooling

Copper–graphite–copper sandwich: superior heat spreader with excellent heat-dissipation ability and good weldability

Compliance-tunable thermal interface materials based on vertically oriented carbon fiber arrays for high-performance thermal management

Encapsulated carbon nanotube array as a thermal interface material compatible with standard electronics packaging

Thermal Conduction in Vertically Aligned Copper Nanowire Arrays and Composites

Rapid Formation of Intermetallic Joints with Sn/metal Composite Alloys by Ultrasonic-Assisted Soldering for High-Temperature Chip Attachment

A Novel Thermal Interface Materials Based on Porous Metal Copper Filled Tin for Die Attachment in Power Device Packaging

High-Tolerance Thin-Film Solder Joints for Electrical Interconnection in Harsh Environments

Low-temperature packaging through Ag-Cu supersaturated solid solution nanoparticle paste for high-temperature power electronics

Ultrasonic-assisted soldering of Sn/Ni composite solder during die bonding for high-temperature application