Abstract:In the classical planar heterojunction perovskite solar cells (PSCs), the electron conducting TiO2 layer shows lower conductivity than the hole transporting materials such as spiro-OMeTAD, which becomes one of the key problems in improving the power conversion efficiency (PCE) of PSCs. In this study, the surface of compact TiO2 layer is modified by a thin self-assembled dodecanedioic acid (DDDA) molecular layer. The TiO2 substrates are immersed into the DDDA solution for 0.5, 2.5, 4.5, 22 h, respectively. It is found that the PCE of PSCs is improved when using the DDDA modified TiO2, showing optimized PCE of 15.35% +/- 0.75% under AM 1.5G illumination at 100 mW.cm(-2) after 4.5 h modification. The short current density (J(SC)) of the best device is improved from 20.34 mA.cm(-2) to 23.28 mA.cm(-2), with the PCE increasing from 14.17% to 15.92%. And it is found that the hysteresis of the PSC is also reduced remarkably with hysteresis index decreasing from 0.4288 to 0.2430. In the meantime, the device with DDDA modification shows a significant improvement in light stability, keeping 71% of its initial PCE value after 720 min exposure under AM 1.5G illumination at 100 mW.cm(-2) without encapsulation. As a contrast, the device without DDDA modification keeps 59% of its initial PCE value under the same condition. To reveal the mechanism, we investigate the surface energy level change using ultraviolet photoemission spectroscopy. It is found that after DDDA modification, the valence-band maximum energy (E-VBM) of TiO2 decreases from -25 eV to -32 eV, and the conduction-band minimum energy (E-CBM) of TiO2 from -05 eV to -12 eV. The shifting of energy level optimizes the energy level alignment at the interface between the TiO2 and perovskite. It promotes the transport of electrons from perovskite layer to compact TiO2 layer and obstructs the transport of holes from perovskite layer to compact TiO2 layer more effectively. In addition, the decrease of E-CBM implies the increase of conductivity of TiO2. We further design a series of electrical experiments, and confirm that the modification improves the conductivity of TiO2 obviously with both contact resistance and thin-film resistance decreasing. In summary, our results indicate the enormous potential of the compact TiO2 layer with a thin self-assembled DDDA molecular layer modification to construct efficient and stable planar heterojunction PSCs for practical applications.

Hydrogenerated black titanium dioxide-embedded conducting polymer for boosting electron flow in perovskite devices

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Hydrogenated TiO2 Thin Film for Accelerating Electron Transport in Highly Efficient Planar Perovskite Solar Cells

Charge transfer enhancement of TiO2/perovskite interface in perovskite solar cells

Improvement of current characteristic of perovskite solar cells using dodecanedioic acid modified TiO2 electron transporting layer

Enhancement of Perovskite Solar Cells by TiO2-Carbon Dot Electron Transport Film Layers

Enhanced Stability and Performance of Inverted Perovskite Solar Cell Using Titanium Interlayer

Surface Modification of TiO2 for Perovskite Solar Cells

Efficient and stable organic solar cells enabled by incorporation of titanium dioxide doped PEDOT:PSS as hole transport layer

Mesoporous TiO 2 Electron Transport Materials Derived from 2D Ti-MOFs for Enhanced Power Conversion Efficiency in Printed Mesoscopic Perovskite Solar Cells

W-doped TiO2 as electron transport layer for high performance solution-processed perovskite solar cells

In Situ Surface Fluorination of TiO 2 Nanocrystals Reinforces Interface Binding of Perovskite Layer for Highly Efficient Solar Cells with Dramatically Enhanced Ultraviolet‐Light Stability

TiO2 modification with multi-acid treatment for efficient interfacial perovskite-TiO2 electron transport

Work-Function-Tunable Electron Transport Layer of Molecule-Capped Metal Oxide for a High-Efficiency and Stable p–i–n Perovskite Solar Cell

Nitrogen-Doped Titanium Dioxide as a Hole Transport Layer for High-Efficiency Formamidinium Perovskite Solar Cells

Experimental and theoretical study of improved mesoporous titanium dioxide perovskite solar cell: The impact of modification with graphene oxide

Ionic Liquid Passivator for Mesoporous Titanium Dioxide Electron Transport Layer to Enhance the Efficiency and Stability of Hole Conductor-Free Perovskite Solar Cells

Room-temperature processed TiO2 to construct composite electron transport layers for efficient planar perovskite solar cells

Highly efficient overlayer derived from peroxotitanium for dye-sensitized solar cells

Nano-structured Electron Transporting Materials for Perovskite Solar Cells.

A ternary organic electron transport layer for efficient and photostable perovskite solar cells under full spectrum illumination