Abstract:Abstract Forming metallurgical phases has a critical impact on the performance of dissimilar materials joints. Here, we shed light on the forming mechanism of equilibrium and non-equilibrium intermetallic compounds (IMCs) in the dissimilar aluminum/steel joints with respect to processing history (e.g., the pressure- and temperature-profiles) and chemical composition, where the used knowledge of free energy and atomic diffusion in the Al-Fe system was taken from first-principles phonon calculations and data available in the literature. We found that the metastable while ductile (judged by the presently predicted elastic constants) Al 6 Fe is a pressure ( P ) favored IMC observed in the processes involving high pressures. The MoSi 2 -type Al 2 Fe is a brittle and a strong P -favored IMC observed at high pressures. The stable, brittle h-Al 5 Fe 2 is the most commonly observed IMC (followed by q-Al 13 Fe 4 ) in almost all processes, such as fusion/solid-state welding and additive manufacturing (AM), since h-Al 5 Fe 2 is temperature-favored, possessing high thermodynamic driving force of formation and the fastest atomic diffusivity among all Al-Fe IMCs. Notably the ductile AlFe 3 , the less ductile AlFe, and most of the other IMCs can be formed during AM, making AM a superior process to achieve desired IMCs in dissimilar materials. In addition, the unknown configurations of Al 2 Fe and Al 5 Fe 2 were also examined by machine learning based datamining together with first-principles verifications and structure predictor. All the IMCs, which are not P- favored, can be identified using the conventional equilibrium phase diagram and the Scheil-Gulliver non-equilibrium simulations.

Characterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System-Microstructures and Mechanical Properties

Exploring the Relationship between the Structural Characteristics and Mechanical Behavior of Multicomponent Fe-Containing Phases: Experimental Studies and First-Principles Calculations

Forming Mechanism of Equilibrium and Non-equilibrium Metallurgical Phases in Dissimilar Materials: Illustrated With Aluminum/steel (Al-Fe) Joints

Regulating microstructures and mechanical properties of Al-Fe-Ni alloys

Experimental and theoretical study of the microstructure evolution and thermal-physical properties of hypereutectic Al–Fe alloys

Phase Diagrams and Elastic Properties of the Fe-Cr-Al Alloys: A First-Principles Based Study

Forming mechanism of equilibrium and non-equilibrium metallurgical phases in dissimilar aluminum/steel (Al–Fe) joints

Microstructure Evolution and Thermophysical Properties of Hypereutectic Al-Fe-Ni Alloys

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

Synchrotron X-ray tomography investigation of 3D morphology of intermetallic phases and pores and their effect on the mechanical properties of cast Al-Cu alloys

Morphology, thermal stability, electronic structure and mechanical properties of α-AlFeMnSi phases with varying Mn/Fe atomic ratios: Experimental studies and DFT calculations

Determination of the Intermetallic α-Phase Crystal Structure in Aluminum Alloys Solidified at Rapid Cooling Rates

Distribution and Morphology of α-Al, Si and Fe-Rich Phases in Al-Si-Fe Alloys under an Electromagnetic Field

Fe-bearing phase formation, microstructure evolution, and mechanical properties of Al-Mg-Si-Fe alloy fabricated by the twin-roll casting process

Phase Equilibria in the Al–Co–Cr–Fe–Ni High Entropy Alloy System: Thermodynamic Description and Experimental Study

Phase transformation kinetics in polycrystalline Fe_xAl_1-x (x>0.6) alloys: Experiment and Simulation

The characterization of Fe-rich phases in a high-pressure die cast hypoeutectic aluminum-silicon alloy

Microstructure and mechanical properties of non equiatomic FeCoNiCuMo high entropy systems

Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles

Insight into the Microstructure and Micromechanical Behavior and Mechanism of the Constitutional Phase of FeNiCrAl0.63 Multi-Principal Element Alloy

Microstructures and Mechanical Behaviors of NiAlFe Intermetallic Compounds