Analysis of Comparative Thermo-Hydraulic Performance of sCO2 and H2O as Heat-Exchange Fluids in Enhanced Geothermal Systems

Jerome Sfeir,George Moridis,Jean-Louis Briaud
DOI: https://doi.org/10.1007/s11242-024-02128-2
IF: 3.6097
2024-09-14
Transport in Porous Media
Abstract:The relative performance of H 2 O and sCO 2 as geothermal working fluids (GWFs) in liquid-dominated enhanced geothermal systems (EGSs) was investigated in this study. Such systems rely on the injection of GWFs (geothermal working fluids) to sustain geothermal energy recovery, which is dominated by conduction-based heat exchange from the rock to the GWF in the hydraulic fracture. H 2 O is currently the only GWF considered for EGS operations, but supercritical CO 2 has been proposed as a potential GWF because of its lower density and viscosity, which lead to the hypothesis of potentially significant thermal energy recovery. However, H 2 O appears to have an initial advantage because of its significantly higher thermal conductivity. We compared the performance of H 2 O and SCO 2 as GWFs in a 3D stencil (minimum repeatable element) of an EGS involving a hydraulic fracture connecting the injection and the production wells, the main body of the EGS rock that provides the heat source, and boundaries that are sufficiently distant from the main body of the main body of the rock to maintain constant pressure and temperature conditions over a 30-year period of EGS operations In our studies we considered variations in the initial reservoir temperature, in the injection method (at a constant-rate and at a constant bottomhole pressure) and in the reservoir permeability, in an effort (a) not only to compare the EGS performance of H 2 O and sCO 2 as GWFs but also (b) to determine the conditions (if any) under which sCO 2 can be more effective than H 2 O. The results of the study indicated the overwhelming superiority of H 2 O as a GWF under any and all of the conditions covered by the study, producing fluids at dependably much higher temperatures and yielding invariably drastically higher energy recovery than sCO 2 despite the consistently higher GWF injection and production rates attained with sCO 2 .
engineering, chemical
What problem does this paper attempt to address?