Abstract:The type and thermophysical properties of heat transfer fluids significantly impact the heat extraction rate of Enhanced Geothermal Systems (EGS). Studies based on field-scale stochastic discrete fracture network geometric models have certain limitations and uncertainties. To compare the heat extraction performance of heat transfer fluids H2O, CO2, and N2O in a core-scale (phi 50 x 100 mm) rough single fracture in hot dry rock, we first constructed the fracture geometry with rock surface roughness characteristics using a fractal self-affine function, with a joint roughness coefficient (JRC) of 12.38. Then, at temperatures ranging from 37 to 300 degrees C and a pressure of 30 MPa, we established a thermo-hydraulic (TH) coupling model based on the thermophysical parameter equations of the three heat transfer fluids. Finally, we conducted a comparative study of the changes in the outlet mean temperature and heat extraction rate after flowing through the fracture, as well as the temperature distribution on the fracture surface, under conditions of constant inlet flow velocity with varying inlet temperature and constant inlet temperature with varying inlet flow velocity. The results indicate that (1) with the increase in inlet flow velocity and temperature, the outlet mean temperature and heat extraction rate of CO2 and N2O at the fracture outlet are essentially the same and lower than those of H2O. (2) When the inlet flow velocity increases from 0.005 m/s to 0.025 m/s, the thermal convection effect from the rock matrix to the fluid in the fracture predominates, and flow velocity is the main factor affecting the heat transfer process between the fluid and the rock matrix. When the inlet temperature increases from 37 degrees C to 57 degrees C, the thermal conduction effect from the rock matrix to the fluid in the fracture predominates, and temperature is the main factor affecting the heat transfer process between the fluid and the rock matrix.(3)When maintaining constant inlet temperature, increasing inlet flow velocity from 0.005 m/s to 0.025 m/s results in CO2 experiencing a maximum heat extraction rate increase of 118.85 W. In contrast, N2O experiences 117.05 W, and H2O experiences 266.4 W.(4) When the inlet flow rate is constant, the maximum increase in heat extraction rate for CO2 is 15.34 W as the inlet temperature increases from 37 degrees C to 57 degrees C; for N2O, it is 13.9 W; and for H2O, it is 45.45 W.

Numerical investigation of heat transfer characteristics of supercritical CO 2 and water flow in 2D self-affine rough fractures

Core-scale Investigation of Convective Heat Transfer of Supercritical Pressure CO2 in Hot Rock Fracture with Various Inclinations

Comparative Investigation of Heat Extraction Performance in 3D Self-Affine Rough Single Fractures Using CO2 ,N2O and H2O As Heat Transfer Fluid

Experimental Study of Convective Heat Transfer of Carbon Dioxide at Supercritical Pressures in a Horizontal Rock Fracture and Its Application to Enhanced Geothermal Systems

Experimental Research on Convection Heat Transfer of Supercritical CO2 in the Smooth Fracture of Granite Rock

Numerical Investigation of Heat Transfer Performance of Water Flowing Through a Reservoir with Two Intersecting Fractures

Numerical Investigation of Seepage and Heat Transfer in Rocks with Various Fracture Patterns for Geothermal Energy Extraction

Experimental study of convective heat transfer characteristics of fractures with different morphologies based on fractal theory

Convective Heat Transfer Analysis of Supercritical CO 2 in Artificial Rock Fractures

Heat Transfer Characterizations of Water Flow Through a Single Fracture with Integrating Water Dissolution Effects for the Enhanced Geothermal Systems

Heat transfer characteristics of water flow through a single rock fracture: The combined effects of shear and surface roughness

Effect of Volumetric Flow Rate on Heat Transfer Characteristics of Single-Fractured Rock with Different Surface Morphology and External Temperature

Investigations of Heat Extraction for Water and CO2 Flow Based on the Rough-Walled Discrete Fracture Network

Convective heat transfer of supercritical CO2 in a rock fracture for enhanced geothermal systems

Study on Flow and Heat Transfer in Single Rock Fractures for Geothermal Heat Extraction

Experimental investigation of seepage and heat transfer in rough fractures for enhanced geothermal systems

Numerical Investigation on the Influence of Surface Flow Direction on the Heat Transfer Characteristics in a Granite Single Fracture

Experimental Research on the Heat Transfer Characteristics of Fluid Flowing Through Rock with Intersecting Fractures

Experimental Study of the Heat Transfer by Water in Rough Fractures and the Effect of Fracture Surface Roughness on the Heat Transfer Characteristics

Investigations of Water Flow Behaviors Induced by Local Temperature Variations through a Single Rough Fracture for the Enhanced Geothermal Systems

Heat Extraction Mechanisms of CO2-water Mixed-Phase Flow in a Single Fracture of Hot Dry Rock