Abstract:Although the emerging 3D DRAM products can significantly improve the computing system performance, the relatively high cost is one of the most critical issues that prevent their wide real-life adoption. Intuitively, a strong memory fault tolerance can be leveraged to reduce the fabrication cost of DRAM dies, and the total cost will reduce if the fabrication cost saving can off-set the cost overhead of memory fault tolerance. Nevertheless, such a simple concept can be a practically viable option only for 3D DRAM because: (1) The stacked logic die can solely implement memory fault tolerance inside 3D DRAM chips, obviating any changes on the host CPUs and CPU-DRAM interfaces. (2) With the total ownership of both the logic die and DRAM dies inside 3D DRAM chips, DRAM manufacturers can fully exploit the potential to truly minimize the 3D DRAM bit cost. Following this intuition, we developed a 3D DRAM fault tolerance design strategy. It can achieve a very strong tolerance to weak DRAM cells at very small redundancy and latency overhead. The key is to cohesively leverage the detectability of weak cells and runtime configurability of error correction code (ECC) decoding. In addition, this design strategy can gracefully embrace the inaccuracy of weak cell detection (e. g., weak cell miss-detection and false-detection). We carried out thorough mathematical analysis, and the results show that, under the redundancy overhead of 1: 8 (same as today's ECC DIMM), this design strategy can tolerate the weak cell rate of as high as 10(-4) and 6 x 10(-5) if 100 and 90 percent of all the weak cells are known in prior. Using Micron's hybrid memory cube (HMC) 3D DRAM chips as the test vehicle, we evaluated the implementation cost and the results show that it only consumes less than 0.4 mm(2) (45 nm node) on the logic die. Using CPU and DRAM simulators, we further carried out simulations over a variety of computing benchmarks and the results show that this design solution only incurs less than 2 percent performance degradation on average.

Design Technology Co-Optimization for the DRAM Cell Structure With Contact Resistance Variation

The Programming Optimization of Capacitorless 1T DRAM Based on the Dual-Gate TFET

The Optimization of Spacer Engineering for Capacitor-Less DRAM Based on the Dual-Gate Tunneling Transistor

Mitigating WL-to-WL Disturbance in Dynamic Random-Access Memory (DRAM) through Adopted Spherical Shallow Trench Isolation with Silicon Nitride Layer in the Buried Channel Array Transistor (BCAT)

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

Double-sided Row Hammer Effect in Sub-20 Nm DRAM: Physical Mechanism, Key Features and Mitigation

Nanoelectromechanical DRAM for Ultra-Large-scale Integration (ULSI)

Understanding the Competitive Interaction in Leakage Mechanisms for Effective Row Hammer Mitigation in Sub-20 Nm DRAM

Improving 3D DRAM Fault Tolerance Through Weak Cell Aware Error Correction.

Understanding and Exploiting Design-Induced Latency Variation in Modern DRAM Chips

A Novel Capacitorless 1T DRAM with Embedded Oxide Layer

Performance Improvement in DRAM Cell Using Novel Nitride/Metal Spacers Structure

Exploiting Challenges of Sub-20 nm CMOS for Affordable Technology Scaling

A Novel Interface Trap 1T0C In-Ga-Zn Oxide DRAM Cell with Enhanced Data Retention

Architecture design exploration of three-dimensional (3D) integrated DRAM

Physical mechanism of resistive switching and optimization design of cell in oxide-based RRAM

CDAR-DRAM - an In-situ Charge Detection and Adaptive Data Restoration DRAM Architecture for Performance and Energy Efficiency Improvement.

Logic-DRAM Co-Design to Exploit the Efficient Repair Technique for Stacked DRAM

A Low-Cost Reduced-Latency DRAM Architecture With Dynamic Reconfiguration of Row Decoder

Probing Active-Area Shift with Improved Kelvin Measurement for Trench DRAM

Programming Strategy Optimization of RRAM Fabricated by 28 nm Standard CMOS Process