Abstract:An IMC with SSVPWM on rectifier side and a BCPWM technique on the inverter side leads to the maximization of the DC‐link voltage, reduction in switching losses and THD of the load voltage. Simulation results confirm the effectiveness of this approach, with real‐time implementation validated using the OPAL‐RT simulator. This article presents a comprehensive investigation into the improved operation of an in‐direct matrix converter (IMC) through the application of improved pulse width modulation (PWM) techniques. Matrix converters (MCs) draw a discontinuous and distorted input current from the AC source, reducing the input power factor and increasing harmonics. The primary objectives of this work are to maximize the DC‐link voltage and improve source current while simultaneously minimizing switching losses and the total harmonic distortion (THD) of the load voltage, thereby improving power quality standards. To achieve these goals, a symmetrical space vector PWM technique (SSVPWM) is employed on the rectifier side, and an improved bus‐clamping PWM technique (BCPWM) is implemented on the inverter side. By strategically controlling the switching patterns, the DC‐link voltage is maximized while adhering to the voltage and current constraints of the switching devices, which improves the input power factor and hence the overall power quality. Additionally, this technique optimizes the operation of the IMC, leads to a reduction of current ripple, and reduces switching losses, thereby leading to higher efficiency. The core principle behind this research lies in the decoupled control of the rectifier and inverter stages, allowing for independent optimization and maximum system performance. By carefully manipulating the modulation indices, the harmonic content in the output voltage is significantly minimized which is vital for applications requiring a high‐quality and low‐distortion power supply. Simulation studies substantiate the efficacy of the independent control approach, showcasing improvements in DC‐link voltage maximization, switching loss reduction, and reduced output voltage THD. Furthermore, the validation of the real‐time implementation of this study was carried out making use of the OPAL‐RT (OP4510) real‐time simulator.

Analysis and Control of Impedance Network Integrated High Voltage Gain USMC for Wider Output Frequency

Analysis and Research on a Mega-Hz-level Super High Frequency Induction Heating Power Supply Converter

Analysis and Design of a High Voltage‐gain Quasi‐z‐source DC–DC Converter

A multiplicator ZCS turn on boost converter with high-efficiency and high-voltage-gain

Analysis of Different PWM Techniques for Enhanced Ultrahigh Gain Z-Network Topology

A New Quadratic Boost Converter with Voltage Multiplier Cell: an Analysis and Assessment

Enhancing Performance of In‐Direct Matrix Converter Through Improved PWM Techniques for Reduced Switching Loss and Optimal DC‐Link Voltage

Extended high gain DC‐DC converter with switched‐inductors, switched‐capacitors and soft‐switching: Analysis and implementation

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Comparative Evaluation of Three Z-Source/Quasi-Z-Source Indirect Matrix Converters.

Modeling, Analysis, and Motor Drive Application of Quasi-Z-Source Indirect Matrix Converter

Modeling, Analysis, and Enhanced Control of Modular Multilevel Converters with Asymmetric Arm Impedance for HVDC Applications

Analysis and implementation of modified quadratic boost high-gain converter using voltage multiplier cell

A Hybrid Control Method for Modified SEPIC Converter with High Voltage Gain and ZVS Characteristic

A Study of Z-Source Dual-Bridge Matrix Converter Immune to Abnormal Input Voltage Disturbance and With High Voltage Transfer Ratio.

A New Three Voltage Level Space Vector Modulation for High-Frequency Link Matrix Converter

A Novel Quasi-Z-Source Indirect Matrix Converter

Design and implementation of switched capacitor-based high gain converter

Modeling and stability analysis of enhanced gain active switched inductor impedance source non-isolated DC to DC converter for PV applications

A Novel High-Gain Multi-Stage Switched-Capacitor-Based DC-DC Boost Converter with Closed-Loop Control

State Space Average Modeling, Small Signal Analysis, and Control Implementation of an Efficient Single-Switch High-Gain Multicell Boost DC-DC Converter with Low Voltage Stress