Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Distributed Control for the Modular Multilevel Matrix Converter

A Branch Current Reallocation Based Energy Balancing Strategy for the Modular Multilevel Matrix Converter Operating Around Equal Frequency

An Optimal Full Frequency Control Strategy for the Modular Multilevel Matrix Converter Based on Predictive Control

Modeling and Control of Modular Multilevel Matrix Converter for Low-Frequency AC Transmission

Design and implementation of a distributed control structure for modular multilevel matrix converter

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

A Control System for Large-Scale Modular Multilevel Converters.

Design and Control of Modular Multilevel Matrix Converter with Symmetrically Integrated Energy Storage for Low Frequency AC System

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

Optimal Arm Current Reallocation of Modular Multilevel Matrix Converter Dedicated for Power Grid Interconnection

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

Control of Modular Multilevel Converter Based on Stationary Frame under Unbalanced AC System

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

Voltage Balancing in a 1-Level Modular Multilevel Matrix Converter

Optimized Branch Current Control of Modular Multilevel Matrix Converters under Branch Fault Conditions

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Control Strategy of the Modular Multilevel Matrix Converter