Development of a novel theory of pressure-induced nucleation in supercritical carbon dioxide

Qi-Bo Wang,Qin-Qin Xu,Jian-Zhong Yin,Hong-Yue Zhu,Bao-Lin Liu,Ming-Zhe Yang

DOI: https://doi.org/10.1039/d2ce00187j

IF: 3.756

2022-01-01

CrystEngComm

Abstract:The theory of pressure-induced supercritical phase nucleation for a binary system with a nonvolatile solute and scCO 2 is proposed.

chemistry, multidisciplinary,crystallography

What problem does this paper attempt to address?

Determination of Solid Solubility in Supercritical Carbon Dioxide by Dynamic Method

任其龙,苏宝根,黄梅,吴平东

DOI: https://doi.org/10.3969/j.issn.1005-9954.2001.03.012

2001-01-01

Abstract:A flow method apparatus was built for determination of solid solubility in supercritical carbon dioxide. A sampling valve was used to obtain the sample, which was especially effective for the solids with less solubility. To test the system, the solubility of model solute naphthalene at 308K was determined. The experimental data are in agreement with literature values. The system works at temperature from 0 to 80°C and pressure from 0.1 to 40MPa.
Theoretical Study on the Controllable Preparation of Superhard BC2N under High Pressure

Qi Gao,Kun Luo,Feifei Ling,Quan Huang,Li Zhu,Qiaoyi Han,Yang Zhang,Yufei Gao,Julong He,Dongli Yu

DOI: https://doi.org/10.1039/d1tc05468f

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Variable speed pressurization has a great influence on structural phase transition.
Experimental and modelling evidence for structural crossover in supercritical CO$_2$

Cillian J. Cockrell,Oliver Dicks,Ling Wang,Kostya Trachenko,Alan K. Soper,Vadim V. Brazhkin,Sarantos Marinakis

DOI: https://doi.org/10.1103/PhysRevE.101.052109

2020-04-30

Abstract:Physics of supercritical state is understood to a much lesser degree compared to subcritical liquids. Carbon dioxide in particular has been intensely studied, yet little is known about the supercritical part of its phase diagram. Here, we combine neutron scattering experiments and molecular dynamics simulations and demonstrate the structural crossover at the Frenkel line. The crossover is seen at pressures as high as 14 times the critical pressure and is evidenced by changes of the main features of the structure factor and pair distribution functions.

Other Condensed Matter,Statistical Mechanics
Prediction of Li2B novel phases and superconductivity under varying pressures

Lingjuan Hao,Xiaochuan Li,Yang Zhang,Kun Luo,Yufei Gao,Feifei Ling,Yingju Wu,Zhisheng Zhao,Dongli Yu

DOI: https://doi.org/10.1016/j.commatsci.2018.11.015

IF: 3.572

2019-01-01

Computational Materials Science

Abstract:•Three novel Li2B phases are proposed.•These Li2B phases are more energy stable than Cmcm-Li2B at ambient pressure.•oC12–Li2B may be experimentally synthesized under ambient pressure.•hP6–Li2B has potential superconductivity.
A Thermal-Fluid-Solid Coupling Computation Model of Initiation Pressure Using Supercritical Carbon Dioxide Fracturing

Yi Chen,Zhihong Kang,Yuzhu Kang,Xiaocheng Chen,Xiaohong Chen,Qingteng Fan,Yukun Du,Jinguang Wang

DOI: https://doi.org/10.3390/pr11020437

IF: 3.5

2023-02-02

Processes

Abstract:With the characteristics of low fracturing pressure, little damage to the reservoirs, and assuming the role of carbon storage, supercritical carbon dioxide (SC-CO2) fracturing is suitable for the development of unconventional oil and gas resources. Based on the tensile failure mechanism of rocks, this paper establishes a thermal-fluid-solid coupling initiation pressure model for SC-CO2 fracturing. Using this model, the changes in formation temperature and pore pressure near a wellbore caused by invasion of CO2 into the formation are analyzed, as well as the impact of these changes on the tangential stress of reservoir rocks. The field data of SC-CO2 fracturing in a sandstone gas well are used to validate the reliability of the model. The results show that SC-CO2 fracturing can significantly reduce the initiation pressure, which decreases with the increase in fracturing fluid injection rate. The minimum value of tangential stress is located at the well wall, and the direction of tangential stress caused by formation temperature and pore pressure is opposite, with the former greater than the latter. The increase in Poisson's ratio, the increase in elastic modulus and the decrease in bottom hole temperature can reduce the initial fracturing pressure of the reservoir. The computation model established in this paper provides an effective method for understanding the reservoir fracturing mechanism under the condition of SC-CO2 invasion.

engineering, chemical
Phase Field Simulation of Solidification under Supergravity

Zhang Zhenhua,Hou Xu,Zhang Yong,Wei Hua,Wang Jie

DOI: https://doi.org/10.1007/s10409-022-22031-x

2022-01-01

Abstract:In order to understand the influence of supergravity on the microstructure of materials, crystal nucleation, dendritic growth, and polycrystal solidification under supergravity are investigated by using the modified nucleation theory and phase field models. Firstly, supergravity is considered in the nucleation theory by using pressure-dependent Gibbs free energy. It is found that the critical radius decreases and the nucleation rate increases when supergravity rises. Secondly, anisotropic heat transport is proposed in the phase field model to investigate the influence of supergravity on dendritic growth. Phase field simulations show that supergravity promotes the secondary dendritic growth in the direction parallel to supergravity. Finally, a multiply phase field model with pressure-dependent interfacial energy is employed to simulate the polycrystalline solidification under supergravity. Due to the depth-dependent pressure by supergravity, crystal grains are significantly refined by high pressure. In addition, gradient distribution of grain size is obtained in the solidification morphology of polycrystalline, which is consistent with previous experimental observations. Results of this work suggest that supergravity can be used to tune the microstructures and properties of materials.
Numerical Study of CO2 Trans-Critical Process Inside Micromodel Based Porous Structures under Supercritical Pressures

Mengshuai Chen,Lin Chen

DOI: https://doi.org/10.1016/j.ijheatfluidflow.2024.109361

IF: 2.643

2024-01-01

International Journal of Heat and Fluid Flow

Abstract:Understanding the flow, heat transfer, and trans-critical process of carbon dioxide in porous media is crucial for various applications, including CO2 sequestration, soil remediation and oil and gas recovery, due to its unique physical properties in the critical region. In this study, a porous media model on a microfluidic chip structure was simulated to emphasize the heat transfer and trans-critical process of CO2 under supercritical pressure in porous media. The study aims to observe the behaviors of CO2 during its transition from subcritical to supercritical temperature under supercritical pressure. The main objective is to observe the temperature distribution and pressure change of CO2 in a porous media model under the influence of bottom heating. At the same time, we observe the changes in the position of the critical temperature point of CO2 in porous media and analyze its heat exchange process in porous media. After the flow reaches a steady state, the temperature span near the grains is 1.6 K, and the pressure drop per unit length is 1480.3 Pa/mm. As the flow time progresses, the critical temperature line migrates from outlet region to inlet region, the range of sCO2 narrows from 81.7 % to 84.7 % in the porous media region. Finally, the influence of different working conditions on the trans-critical region is studied. It is hoped that this study will contribute to the understanding of the trans-critical process of CO2 in porous media.
Coupled Extraction and Crystal Growth in Supercritical Solutions: Model and Theory

Zhan-Chao Hu,Xin-Rong Zhang

DOI: https://doi.org/10.1016/j.supflu.2019.104578

2019-01-01

Abstract:For a supercritical solvent-solute system, as a critical end point (CEP) is approached, the solubility becomes sensitive to temperature variations. By virtue of this phenomenon, a conceptual model is proposed to combine extraction and crystal growth. CO2-naphthalene is chosen as the reference system. Theoretical optimizations suggest that the newly defined pseudo-CEPs are favorable reference states, especially those close to the lower CEP. In each near-CEP region, the performance is promoted when the CEP is approached. The temperature at the bottom wall should be higher than that at the top one to offset the stabilizing concentration gradient due to gravity and initiate double-diffusive convection in the cooperative regime. Numerical simulations confirm that the performance of the current model operating at the optimized reference state is better than the previous experimental results in terms of crystal growth rates. The conceptual model provides an efficient configuration for coupled extraction and crystal growth apparatuses. (C) 2019 Elsevier B.V. All rights reserved.
PHYSICAL REVIEW B 98, 134107 (2018) Elastic stability of CO2 phase I under high temperature and pressure

Siyang Guo,Xiaoli Huang,Sergey N. Tkachev,Xinpeng Fu,Jung-fu Lin,Xinyang Li,Zhu Mao,Qiang Zhou,Fangfei Li,Tian Cui

2018-01-01

Abstract:Siyang Guo,1 Xiaoli Huang,1 Sergey N. Tkachev,2 Xinpeng Fu,1 Jung-fu Lin,3 Xinyang Li,4 Zhu Mao,4 Qiang Zhou,1 Fangfei Li,1,* and Tian Cui1 1State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China 2Center for Advanced Radiation Sources, University of Chicago, Chicago, Illinois 60637, USA 3Department of Geological Sciences, the University of Texas at Austin, Austin, Texas 78712, USA 4Laboratory of Seismology and Physics of Earth’s Interior, School of Earth and Space Sciences, University of Science and Technology of China, Hefei, Anhui 230026, China
Formation, Structure, and Evolution of Boiling Nucleus and Interfacial Tension Between Bulk Liquid Phase and Nucleus

Xiao-Dong Wang,Xiao-Feng Peng,Yong Tian,Bu-Xuan Wang

DOI: https://doi.org/10.1007/s00231-004-0602-9

2005-01-01

Heat and Mass Transfer

Abstract:In this paper, the concept of the molecular free path is introduced to derive a criterion distinguishing active molecules from inactive molecules in liquid phase. A concept of the critical aggregation concentration (CAC) of active molecules is proposed to describe the physical configuration before the formation of a nucleus during vapor–liquid phase transition. All active molecules exist as monomers when the concentration of active molecules is lower than CAC, while the active molecules will generate aggregation once the concentration of the active molecules reaches CAC. However, these aggregates with aggregation number, N, smaller than five can steadily exist in bulk phase. The other excess active molecules can only produce infinite aggregation and form a critical nucleus of vapor–liquid phase transition. Without any outer perturbation the state point of CAC corresponds to the critical superheated or supercooled state. Meanwhile, a model of two-region structure of a nucleus is proposed to describe nucleus evolution. The interfacial tension between bulk liquid phase and nucleus is dependent of the density gradient in the transition region and varies with the structure change of the transition region. With the interfacial tension calculated using this model, the predicted nucleation rate is very close to the experimental measurement. Furthermore, this model and associated analysis provides solid theoretical evidences to clarify the definition of nucleation rate and understand nucleation phenomenon with the insight into the physical nature.
Alternative Theory of Nucleation in Super-Cooled Liquids

Laurent-Charles Valdès,Frédéric Affouard

DOI: https://doi.org/10.48550/arXiv.1803.03454

2018-03-09

Statistical Mechanics

Abstract:Having discovered a dimension mistake in two key formulas of the Classical Nucleation Theory (CNT) but wishing to remain in the style of this theory, we propose to approach nucleation on the basis of the Zeldovich unsteady rate formula, with the dimensionally correct expressions for the nucleation rate and time constant. Beforehand, the problematic status - physical size or simple parameter - of interfacial tension in CNT was audited. The results of numerical simulations on nucleation in various attraction but fixed repulsion conditions of the interaction potential have led us to motivate, then establish, a thermal evolution law for interfacial tension. Taking into account a scale dependance in the vicinity of absolute zero in temperature, this law is of stretched Arrhenius type. It works with the Zeldovich formula, notably for the determination of adjusting parameters. A remarkably accurate adjusting of this law to the numerical simulations has been obtained and led us to exhibit melting crystal volume as a measure of potential attractivity. It should allow accurate forecasts of instantaneous nucleation rate and average nucleation duration in physical or numerical super-cooled monoatomic liquids.
The air pressure effect on the homogeneous nucleation of carbon dioxide by molecular simulation

Martin Horsch,Zengyong Lin,Thorsten Windmann,Hans Hasse,Jadran Vrabec

DOI: https://doi.org/10.1016/j.atmosres.2010.10.016

2010-01-12

Abstract:Vapour-liquid equilibria (VLE) and the influence of an inert carrier gas on homogeneous vapour to liquid nucleation are investigated by molecular simulation for quaternary mixtures of carbon dioxide, nitrogen, oxygen, and argon. Canonical ensemble molecular dynamics simulation using the Yasuoka-Matsumoto method is applied to nucleation in supersaturated vapours that contain more carbon dioxide than in the saturated state at the dew line. Established molecular models are employed that are known to accurately reproduce the VLE of the pure fluids as well as their binary and ternary mixtures. On the basis of these models, also the quaternary VLE properties of the bulk fluid are determined with the Grand Equilibrium method. Simulation results for the carrier gas influence on the nucleation rate are compared with the classical nucleation theory (CNT) considering the "pressure effect" [Phys. Rev. Lett. 101: 125703 (2008)]. It is found that the presence of air as a carrier gas decreases the nucleation rate only slightly and, in particular, to a significantly lower extent than predicted by CNT. The nucleation rate of carbon dioxide is generally underestimated by CNT, leading to a deviation between one and two orders of magnitude for pure carbon dioxide in the vicinity of the spinodal line and up to three orders of magnitude in presence of air as a carrier gas. Furthermore, CNT predicts a temperature dependence of the nucleation rate in the spinodal limit, which cannot be confirmed by molecular simulation.

Atmospheric and Oceanic Physics,Atomic and Molecular Clusters
Integration of a fused silica capillary and in-situ Raman spectroscopy for investigating CO 2 solubility in n -dodecane at near-critical and supercritical conditions of CO 2

Jun-Liang Wang,Zi-Hao Song,Lin-Jun Li,Li-Li Yang,Quan-Yuan Wang,I-Ming Chou,Zhi-Yan Pan,Junliang Wang,Zihao Song,Linjun Li,Lili Yang,Quanyuan Wang,Zhiyan Pan

DOI: https://doi.org/10.1016/j.petsci.2022.06.014

IF: 4.757

2022-06-22

Petroleum Science

Abstract:To determine the solubility of CO 2 in n -dodecane at T = 303.15–353.15 K, P ≤ 11.0 MPa, an integrated fused silica capillary and in-situ Raman spectroscopy system was built. The Raman peak intensity ratio (ICO2/IC-H) between the upper band of CO 2 Fermi diad ( ICO2 ) and the C–H stretching band of n -dodecane (IC-H) was employed to determine the solubility of CO 2 in n -dodecane based on the calibrated correlation equation between the known CO 2 molality in n -dodecane and the ICO2/IC-H ratio with R 2 = 0.9998. The results indicated that the solubility of CO 2 decreased with increasing temperature and increased with increasing pressure. The maximum CO 2 molality (30.7314 mol/kg) was obtained at 303.15 K and 7.00 MPa. Finally, a solubility prediction model ( lnS=(P−A)/B ) based on the relationship with temperature ( T in K) and pressure ( P in MPa) was developed, where S is CO 2 molality, A=−8×10−6T2+0.0354T−8.1605 , and B=0.0405T−10.756 . The results indicated that the solubilities of CO 2 derived from this model were in good agreement with the experimental data.

energy & fuels,engineering, petroleum
Critical Threshold for Bubble-like Nucleation during Pseudoboiling at Supercritical Pressures

Ming Dong,Jinliang Xu,Yan Wang

DOI: https://doi.org/10.1021/acs.langmuir.4c01477

IF: 3.9

2024-06-25

Langmuir

Abstract:Supercritical pseudoboiling was proposed in the 1950s-1960s. Recently, evaporation-like and boiling-like heat transfer have been directly observed in macroscopic scales, and the contribution of pseudoboiling to the total heat transfer rate has been quantitatively characterized experimentally. Here, we explore the critical threshold to generate a bubble-like nucleus at supercritical pressure at the atomic scale, characterized by the total energy (Te = Ke + Pe, where Ke and Pe are kinetic energy and potential energy, respectively). Molecular dynamics simulations are performed, including an argon fluid box heated by a solid wall having its temperature above the fluid temperature. The fluid pressure is controlled by a movable piston wall opposite the heating wall. The effects of pressure, nonuniform heating, and surface wettability on pseudoboiling are investigated. It is found that the criterion Te > 0 should be satisfied for subcritical boiling, matching that reported previously. The criterion for supercritical pseudoboiling was newly obtained such that Te > 0.012 eV at 8 MPa for argon, but the threshold increases as pressure increases. Nonuniform heating and surface wettability do not affect the critical threshold of Te for bubble-like nucleation but affect the location of the initially generated bubble-like nucleus and the stabilized pseudofilm or pseudonucleate heat transfer modes, where the former is similar to (vapor) film boiling and the latter is similar to nucleate boiling at subcritical pressure. Because pseudoboiling occurs without surface tension at supercritical pressure, we observe that the bubble-like structure may not display a perfectly smooth gas-liquid interface but may display an irregular pattern instead. Our work explains pseudoboiling from the viewpoint of the competition between kinetic energy and potential energy and presents a link regarding boiling in the two domains of subcritical pressure and supercritical pressure.
Phase distribution including a bubblelike region in supercritical fluid

Jinliang Xu,Yan Wang,Xiaojing Ma

DOI: https://doi.org/10.1103/PhysRevE.104.014142

Abstract:Pseudoboiling in supercritical fluid (SF) has been paid great attention in recent years. Available works mainly focus on thermodynamics analysis. Fewer studies were reported on the spatial time phase distribution. Here, SF is investigated in a multiphase fluid framework using molecular dynamics (MD) simulations. A simulation box contains 10 976 argon atoms, with periodic boundary conditions applied on all the box surfaces. Pressure and temperature are well controlled. Based on MD simulation results, an onset pseudoboiling temperature T^{-} and a termination pseudoboiling temperature T^{+} are defined using the neighboring molecules method, the radial distribution function method, and the two-body excess entropy method. The two transition temperatures divide the whole phase diagram into three regimes of liquidlike, two-phase-like (TPL), and gaslike, and the MD determined T^{-} and T^{+} well matched the thermodynamics-determined values. In the TPL regime, nanovoids are observed to have two distinct characteristics: (1) Particles are sparsely distributed to have gas density inside the void, but are densely populated to have liquid density outside the void. (2) Voids have a curved interface. These characteristics are very similar to bubble characteristics in subcritical pressure. Hence, voids in the supercritical state are called "bubblelike" in this paper. Nonlinear dynamics demonstrates chaotic behavior in the TPL regime, similar to the two-phase regime in the subcritical domain. The above findings give strong evidence that SF in the TPL regime consists of a mixture of bubblelike voids and surrounding liquids. Our work highlights the multiphase feature of a SF, hence, the well-established multiphase theory in subcritical pressures can be introduced to handle the complex SF.
Recent Advances in Supercritical CO2 Fracturing: New Theory, New Technology, and Application

Wenguang Duan,Baojiang Sun,Deng Pan,Jianchun Xu,Jian Liu

DOI: https://doi.org/10.2118/204725-ms

2021-12-15

Abstract:Abstract The shale oil reservoir in Jimusaer has the characteristics of low porosity and low permeability, resulting in significant resistance in oil flow compared with conventional oil reservoirs. Fracturing is needed to increase shale oil production. Supercritical CO2 (SC-CO2) is an ideal choice for fracturing fluid due to its unique physical and chemical properties. SC-CO2 fracturing is able to make CO2 flow into microfractures and greatly reduce the pumping pressure. New progress has been made in the application of the supercritical CO2 fracturing technology in Jimusaer. A phase control model of SC-CO2 fracturing as a function of temperature and pressure is established, which takes into account the SC-CO2 features, intrinsic energy, flow behavior in fracture and fluid filtration. In this paper, the influences of injection pressure and temperature, injection rate, temperature-pressure field, temperature gradient, and phase behavior are analyzed extensively, in addition, the phase control model and its chart of fracture are presented. The proppant accumulation height reduces by a small amount with the increase of the fracturing fluid injection rate. It is necessary to improve the proppant pumping technology by the sand embankment section and proppant concentration. The liquid transforms into supercritical fluid, when flowing in wellbores and fractures. Different fractures have different phase points, and a lower injection temperature is affected by higher injection rate, lower temperature gradient and closer position from transformation point to the end of fracture. Therefore, in order to achieve a better fracturing effect, the injection temperature, pressure, and rate need to be optimized by surface equipment according to the reservoir conditions, to control the phase behavior of CO2. We built a phase control model for the SC-CO2 fracturing technology, which considers temperature control. We also developed some new techniques to improve SC-CO2 fracturing which is critically needed in the Jimusaer oilfield.
Pressure-induced superconductivity domes described with a theoretical equation based on the free volume concept

Tian Hao

DOI: https://doi.org/10.1016/j.isci.2024.110593

IF: 5.8

2024-07-30

iScience

Abstract:A generic conductivity equation developed in our previous work is borrowed to explore how superconductivity transition temperature T c changes with external high pressure. The volume-pressure relationship revealed in the literature is utilized to estimate the pressure-dependent free volume based on our free volume equation. Pressure-induced single and double superconductivity domes are predicted with the obtained equation. It is also used to fit experimental data available in the literature. A good agreement with experimental observations is obtained. Our equation can fit nonlinear and polynomial relationships as well. The findings provide a theoretical foundation for pressure-induced phenomena among many superconductors.
Ab-initio structure and dynamics of supercritical CO2

Wenhui Mi,Pablo Ramos,Jack Maranhao,Michele Pavanello

DOI: https://doi.org/10.48550/arXiv.1910.07359

IF: 2.552

2019-10-16

Chemical Physics

Abstract:Green technologies rely on green solvents and fluids. Among them, supercritical CO2 already finds many important applications. The molecular level understanding of the dynamics and structure of this supercritical fluid is a prerequisite to rational design of future green technologies. Unfortunately, the commonly employed Kohn-Sham DFT is too computationally demanding to produce meaningfully converged dynamics within a reasonable time and with a reasonable computational effort. Thanks to subsystem DFT, we analyze finite-size effects by considering simulations cells of varying sizes (up to 256 independent molecules in the cell) and finite-time effects by running 100 ps-long trajectories. We find that the simulations are in reasonable and semiquantitative agreement with the available neutron diffraction experiments and that, as opposed to the gas phase, the CO2 molecules in the fluid are bent with an average OCO angle of 175.8 degrees. Our simulations also confirm that the dimer T-shape is the most prevalent configuration. Our results further strengthen the experiment-simulation agreement for this fluid when comparing radial distribution functions and diffusion coefficient, confirming subsystem DFT as a viable tool for modeling structure and dynamics of condensed-phase systems.
Molecular Dynamics Simulations of the Evaporation Process of a Fuel Droplet Under Supercritical Environment

Guo-Wei XIAO,K.H. LUO,Xiao MA,Shi-Jin SHUAI

2017-01-01

Journal of Engineering Thermophysics

Abstract:The evaporation process of an n-dodecane droplet surrounded by nitrogen ambient under supercritical pressures and sub-to super-critical temperatures is studied by molecular dynamics simulation.Results show that the evaporation process under high pressures depart considerably from the theoretical prediction of D2-law.Both environmental pressure and temperature have significant influence on the evaporation rate,and elevated pressure can greatly increase the nitrogen solubility in the liquid phase and also the liquid-vapor interface thickness.It is found that under supercritical environmental conditions,the expanded interface may enter the continuum regime,leading to a diffusion dominated mixing process,rather than a conventional evaporation.
Simulation of wellbore temperature and pressure field in supercritical carbon dioxide fracturing

Nianyin Li,Jiajie Yu,Haitao Zhang,Qian Zhang,Jia Kang,Nanlin Zhang,Chao Wang

DOI: https://doi.org/10.1080/10916466.2022.2116047

IF: 1.695

2022-08-28

Petroleum Science and Technology

Abstract:As unconventional oil and gas receive more and more attention, scholars pay more and more attention to waterless fracturing technology. Among them, carbon dioxide fracturing technology, as the main representative of waterless fracturing technology, has unique advantages and broad application prospects in the development of unconventional oil and gas reservoirs. However, when using carbon dioxide fracturing fluid for construction, carbon dioxide is greatly affected by temperature and pressure, so it is necessary to simulate the temperature and pressure in the wellbore during carbon dioxide fracturing construction. In this article, the basic physical properties of carbon dioxide under different temperatures and pressures are analyzed, and the changes of wellbore temperature and pressure during carbon dioxide fracturing are studied based on the generalized heat conduction theory. The results show that the faster the injection rate of CO 2 fracturing fluid at the wellhead, the lower the bottom hole temperature and the higher the bottom hole pressure. However, the higher the wellhead injection temperature, the higher the bottom hole temperature, and the lower the bottom hole pressure.

energy & fuels,engineering, chemical, petroleum

Development of a novel theory of pressure-induced nucleation in supercritical carbon dioxide

Determination of Solid Solubility in Supercritical Carbon Dioxide by Dynamic Method

Theoretical Study on the Controllable Preparation of Superhard BC2N under High Pressure

Experimental and modelling evidence for structural crossover in supercritical CO$_2$

Prediction of Li2B novel phases and superconductivity under varying pressures

A Thermal-Fluid-Solid Coupling Computation Model of Initiation Pressure Using Supercritical Carbon Dioxide Fracturing

Phase Field Simulation of Solidification under Supergravity

Numerical Study of CO2 Trans-Critical Process Inside Micromodel Based Porous Structures under Supercritical Pressures

Coupled Extraction and Crystal Growth in Supercritical Solutions: Model and Theory

PHYSICAL REVIEW B 98, 134107 (2018) Elastic stability of CO2 phase I under high temperature and pressure

Formation, Structure, and Evolution of Boiling Nucleus and Interfacial Tension Between Bulk Liquid Phase and Nucleus

Alternative Theory of Nucleation in Super-Cooled Liquids

The air pressure effect on the homogeneous nucleation of carbon dioxide by molecular simulation

Integration of a fused silica capillary and in-situ Raman spectroscopy for investigating CO 2 solubility in n -dodecane at near-critical and supercritical conditions of CO 2

Critical Threshold for Bubble-like Nucleation during Pseudoboiling at Supercritical Pressures

Phase distribution including a bubblelike region in supercritical fluid

Recent Advances in Supercritical CO2 Fracturing: New Theory, New Technology, and Application

Pressure-induced superconductivity domes described with a theoretical equation based on the free volume concept

Ab-initio structure and dynamics of supercritical CO2

Molecular Dynamics Simulations of the Evaporation Process of a Fuel Droplet Under Supercritical Environment

Simulation of wellbore temperature and pressure field in supercritical carbon dioxide fracturing