Abstract:Boiling crisis is the rapid formation of the quasi-continuous vapor film between the heater and the liquid when the heat supply exceeds a critical value. We propose a mechanism for the boiling crisis that is based on the spreading of the dry spot under a vapor bubble. The spreading is initiated by the vapor recoil force, a force coming from the liquid evaporation into the bubble. Since the evaporation intensity increases sharply near the triple contact line, the influence of the vapor recoil can be described as a change of the apparent contact angle. Therefore, for the most usual case of complete wetting of the heating surface by the liquid, the boiling crisis can be understood as a drying transition from complete to partial wetting. The state of nucleate boiling, which is boiling in its usual sense, is characterized by a very large rate of heat transfer from the heating surface to the bulk because the superheated liquid is carried away from the heating surface by the departing vapor bubbles. If the heating power is increased, the temperature of the heating surface increases with the heat flux. When the heat flux from the heater reaches a threshold value q CHF (the critical heat flux, CHF), the vapor bubbles suddenly form a film which covers the heating surface and insulates the latter from the bulk of the liquid. The temperature of the heating surface grows so rapidly that the heater can fuse unless its power is controlled. This phenomenon is known under the names of "boiling crisis," "burnout," or "Departure from Nucleate Boiling" (DNB) [1]. The final state of this transition is called film boiling. This problem has become very important since the 1940's, with the beginning of the industrial exploitation of heat exchangers with large heat fluxes (as with nuclear power stations). Since then a huge amount of research has been done for the various conditions of pool boiling (boiling without imposed external flow) and flow boiling (boiling of the flowing water) [2]. Numerous empirical correlations have been proposed, each describing the dependence of the CHF on the physical parameters of the liquid and of the heater more or less correctly for a particular geometry and particular conditions of boiling [2]. A strong dependence of the threshold on the details of the experimental setup coupled with difficulties in separating the consequences of DNB from its causes is at the origin of a large number of frequently controversial hypotheses [2]. The violence of boiling makes observations quite difficult. Good quality photographic experiments are presented in only a few articles (see e.g. [3] -- [6]). Despite an increasing interest in the physical aspect of the problem during recent years [7,8] and numerous empirical approaches, the underlying physics still remains obscure. In this Letter, we propose a model based on a non-equilibrium drying transition.

Critical Threshold for Bubble-like Nucleation during Pseudoboiling at Supercritical Pressures

Quantitative characterization of the pseudo-boiling contribution to supercritical heat transfer

A Review of Pool-Boiling Processes Based on Bubble-Dynamics Parameters

Phase distribution including a bubblelike region in supercritical fluid

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Boiling Crisis Due to Bubble Interactions

The three-regime-model for pseudo-boiling in supercritical pressure

Thermodynamic Bifurcations of Boiling in Solid-State Nanopores

Molecular dynamics study on the enhancement of heterogeneous nucleate boiling of mixed liquid on superhydrophilic surfaces

How heterogeneous wettability enhances boiling

Mass Transfer Behavior at Bubble Surface During Nucleate Boiling

Microscale heat transfer and phase change mechanisms of carbon dioxide at near-critical conditions

Experimental Investigations on the Boiling Heat Transfer of Horizontal Flow in the Near-Critical Region

A unifying criterion of the boiling crisis

Numerical Simulation of Nucleate Pool Boiling under High Pressure Using an Initial Micro-Layer Thickness Model

Two-dimensional Mesoscale Simulations of Saturated Pool Boiling from Rough Surfaces. Part II: Bubble Interactions above Multi-Cavities

Analysis of Heat Transfer Mechanism in Supercritical Fluids from the Aspect of Pool Heating

Boiling crisis and non-equilibrium drying transition

Mechanical nonequilibrium considerations in homogeneous bubble nucleation for unsteady-state boiling

Bubble departure and sliding in high-pressure flow boiling of water

A Novel Pressure-Controlled Molecular Dynamics Simulation Method for Nanoscale Boiling Heat Transfer