Abstract:We have performed a series of molecular dynamics simulations aimed at the evaluation of the solubility of CO2 in silicate melts of natural composition (from felsic to ultramafic). In making in contact within the simulation cell a supercritical CO2 phase with a silicate melt of a given composition, we have been able to evaluate (i) the solubility of CO2 in the P–T range 1473–2273K and 20–150kbar, (ii) the density change experienced by the CO2-bearing melt, (iii) the respective concentrations of CO2 and CO 3 2 - species in the melt, (iv) the lifetime and the diffusivity of these species and (v) the structure of the melt around the carbonate groups. The main results are the following: (1) The solubility of CO2 increases markedly with the pressure in the three investigated melts (a rhyolite, a mid-ocean ridge basalt and a kimberlite) from about ∼2wt% CO2 at 20kbar to ∼25wt% at 100kbar and 2273K. The solubility is found to be weakly dependent on the melt composition (as far as the present compositions are concerned) and it is only at very high pressure (above ∼100kbar) that a clear hierarchy between solubilities occurs (rhyolite<MORB<kimberlite). Furthermore at a given pressure the calculated solubility is negatively correlated with the temperature. (2) In CO2-saturated melts, the proportion of carbonate ions ( CO 3 2 - ) is positively correlated with the pressure at isothermal condition and is negatively correlated with the temperature at isobaric condition (and vice versa for molecular CO2). Furthermore, at fixed (P, T) conditions the proportion of carbonate ions is higher in CO2-undersaturated melts than in the CO2-saturated melt. Although the proportion of molecular CO2 decreases when the degree of depolymerization of the melt increases, it is still significant in CO2-saturated basic and ultrabasic compositions at high temperatures. This finding is at variance with experimental data on CO2-bearing glasses which show no evidence of molecular CO2 as soon as the degree of depolymerization of the melt is high (e.g. basalt). These conflicting results can be reconciled with each other by noticing that a simple low temperature extrapolation of the simulation data predicts that the proportion of molecular CO2 in basaltic melts might be negligible in the glass at room temperature. (3) The carbonate ions are found to be transient species in the liquid phase, with a lifetime increasing exponentially with the inverse of the temperature. Contrarily to a usual assumption, the diffusivity of carbonate ions into the liquid silicate is not vanishingly small with respect to that of CO2 molecules: in MORB they differ from each other by a factor of ∼6 at 1473K and only a factor of ∼2 at 2273K. Although the bulk diffusivity of CO2 is governed primarily by the diffusivity of CO2 molecules, the carbonate ions contribute significantly to the diffusivity of CO2 in depolymerized melts. (4) Concerning the structure of the CO2-bearing silicate melt, the carbonate ions are found to be preferentially associated with NBO’s of the melt, with an affinity for NBOs which exceeds that for BOs by almost one order of magnitude. This result explains why the concentration in carbonate ions is positively correlated with the degree of depolymerization of the melt and diminishes drastically in fully polymerized melts where the number of NBO’s is close to zero. Furthermore, the network modifier cations are not randomly distributed in the close vicinity of carbonate groups but exhibit a preferential ordering which depends at once on the nature of the cation and on the melt composition. However at the high temperatures investigated here, there is no evidence of long lived complexes between carbonate groups and metal cations.

Integration of a fused silica capillary and in-situ Raman spectroscopy for investigating CO 2 solubility in n -dodecane at near-critical and supercritical conditions of CO 2

Determination of Solid Solubility in Supercritical Carbon Dioxide by Dynamic Method

Determination of water solubility in supercritical CO2 from 313.15 to 473.15 K and from 10 to 50 MPa by in-situ quantitative Raman spectroscopy

Solubility of N-Alkanes in Supercritical CO2 at Diverse Temperature and Pressure

A Multi-scale Computer Simulation of the Solvation Behavior of n-Alkane in Supercritical Carbon Dioxide

Experiment based modeling of CO2 solubility in H2O at 313.15–473.15 K and 0.5–200 MPa

Modeling of CO2 equilibrium solubility in a novel 1-Diethylamino-2-Propanol Solvent

Analysis of solubility on N2 in liquid CO2

Measurement of CO2 solubilities in dimethyl carbonate

Determination of Co2 Solubility in Saturated Liquid Ch4 + N-2 and Ch4 + C2h6 Mixtures above Atmospheric Pressure

Solubility of 4,4'-Methylene Diphenyl Diisocyanate in Supercritical Carbon Dioxide

Solubility of Carbon Dioxide in Methanol from 213.15 K to 273.15 K: Measurement and Modeling

Experimental Study of Dissolution Rate of a CO2 Droplet and CO2 Solubility in High Pressure and Low Temperature Seawater with Hydrate Free

Solubility and volumetric mass transfer coefficient of CO2in 1-pentanol

Investigation of the Solubilities of Carbon Dioxide in Some Low Volatile Solvents and Their Thermodynamic Properties

Quantitative Raman spectroscopic investigation of geo-fluids high-pressure phase equilibria: Part I. Accurate calibration and determination of CO 2 solubility in water from 273.15 to 573.15 K and from 10 to 120 MPa

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Raman Spectroscopic Measurements of Co2 Density: Experimental Calibration with High-Pressure Optical Cell (hpoc) and Fused Silica Capillary Capsule (fscc) with Application to Fluid Inclusion Observations

Soret Effect on the Diffusion of CO2 in Aqueous Solution under High-Pressure

Carbon dioxide in silicate melts: A molecular dynamics simulation study

In situ Raman spectroscopic measurement of the 13C/12C ratio in CO2: Experimental calibrations on the effects of fluid pressure, temperature and composition