Abstract:Impact response and damage evolution in multi‐scale analysis of novel 3D carbon fiber‐reinforced PEEK composites. Thermoplastic composites have a high application demand in aerospace, marine military and other cutting‐edge industry. However, it poses a considerable obstacle in achieving three‐dimensional (3D) thermoplastic composites because of the inadequate infiltration of highly viscous thermoplastic resins. In this paper, high‐toughness Polyetheretherketone (PEEK) resin‐based 3D orthogonal carbon fiber thermoplastic composites were designed and obtained. Low‐velocity impact test was conducted on 3D orthogonal woven composite (3DOWC) under the energy levels of 5 and 10 J, and its performance was compared with that of the 2D unidirectional layup composite (2DULC) and the 2D plain layup composite (2DPLC). The results showed that 3DOWC possessed superior elastic energy absorption capacity and less damage morphology compared to 2D composites. 3DOWC had the highest contact force value of 2420.25 N at 10 J, which is 36.83% higher than that of 2DPLC. Furthermore, a finite element model in multi‐scale was established to investigate the damage evolution and failure mechanism of the 3D orthogonal woven CF/PEEK composites. The damage morphology observed in both experimental and numerical findings demonstrated that the matrix shedding, while the yarn fractured on the nonimpact side beneath the impact point. Additionally, enhancing the tensile strength of the yarn in the bottom layer can lead to further improvement in impact resistance. This work provides an innovative method for manufacturing 3D thermoplastic composites and lays the foundation for the impact simulation analysis of such composites. Highlights A novel approach was introduced for fabricating 3D carbon fiber/PEEK composites, which exhibits remarkable resistance to impact. A comprehensive investigation was conducted to evaluate the impact properties of 3D thermoplastic composite compared to 2D composite. A finite element model in multi‐scale including failure criteria was established to simulate the damage evolution.

Comparison of low-velocity impact damage in thermoplastic and thermoset composites by non-destructive three-dimensional X-ray microscope

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Analysis of impact response and damage evolution in multi‐scale of novel 3D carbon fiber‐reinforced polyetheretherketone composites

Study on the Low-Velocity Impact Response and Damage Mechanisms of Thermoplastic Composites

Research on low‐velocity impact resistance of carbon fiber composite laminates

Study on Low-Velocity Impact and Residual Compressive Mechanical Properties of Carbon Fiber-Epoxy Resin Composites

Two-position impact behavior and interference mechanism of CFF/PEEK thermoplastic composites

Assessment of the 3D Ply-by-ply Fiber Structure in Impacted CFRP by Means of Planar Ultrasound Computed Tomography (Pu-Ct)

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups

Impact responses and residual flexural properties of narrow CFRP laminates

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

Low-Velocity Impact and Post-Impact Residual Flexural Properties of Kevlar/EP Three-Dimensional Angle-Interlock Composites

Low velocity impact and compression after impact of thin and thick laminated carbon fiber composite panels

Experimental study of the importance of fibre breakage on the strength of thermoplastic matrix composites subjected to compression after impact

Impact Damage Tolerance of Thermoset Composites Reinforced with Hybrid Commingled Yarns

Experimental investigation on high-velocity impact damage and compression after impact behavior of 2D and 3D textile composites

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Comparative Study on the Low-Velocity Impact Properties of Unidirectional Flax and Carbon Fiber Reinforced Epoxy Plates