Abstract:Impact response and damage evolution in multi‐scale analysis of novel 3D carbon fiber‐reinforced PEEK composites. Thermoplastic composites have a high application demand in aerospace, marine military and other cutting‐edge industry. However, it poses a considerable obstacle in achieving three‐dimensional (3D) thermoplastic composites because of the inadequate infiltration of highly viscous thermoplastic resins. In this paper, high‐toughness Polyetheretherketone (PEEK) resin‐based 3D orthogonal carbon fiber thermoplastic composites were designed and obtained. Low‐velocity impact test was conducted on 3D orthogonal woven composite (3DOWC) under the energy levels of 5 and 10 J, and its performance was compared with that of the 2D unidirectional layup composite (2DULC) and the 2D plain layup composite (2DPLC). The results showed that 3DOWC possessed superior elastic energy absorption capacity and less damage morphology compared to 2D composites. 3DOWC had the highest contact force value of 2420.25 N at 10 J, which is 36.83% higher than that of 2DPLC. Furthermore, a finite element model in multi‐scale was established to investigate the damage evolution and failure mechanism of the 3D orthogonal woven CF/PEEK composites. The damage morphology observed in both experimental and numerical findings demonstrated that the matrix shedding, while the yarn fractured on the nonimpact side beneath the impact point. Additionally, enhancing the tensile strength of the yarn in the bottom layer can lead to further improvement in impact resistance. This work provides an innovative method for manufacturing 3D thermoplastic composites and lays the foundation for the impact simulation analysis of such composites. Highlights A novel approach was introduced for fabricating 3D carbon fiber/PEEK composites, which exhibits remarkable resistance to impact. A comprehensive investigation was conducted to evaluate the impact properties of 3D thermoplastic composite compared to 2D composite. A finite element model in multi‐scale including failure criteria was established to simulate the damage evolution.

Two-position impact behavior and interference mechanism of CFF/PEEK thermoplastic composites

Effect of Double Impact Positions on the Low Velocity Impact Behaviors and Damage Interference Mechanism for Composite Laminates

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

Impact responses and residual flexural properties of narrow CFRP laminates

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Study on the Low-Velocity Impact Response and Damage Mechanisms of Thermoplastic Composites

Low-Velocity Impact Behavior and Damage Characteristics of CFRP Laminates

Effect of Z-pin Insertion Angles on Low-Velocity Impact Mechanical Response and Damage Mechanism of CFRP Laminates with Different Layups

Analysis of impact response and damage evolution in multi‐scale of novel 3D carbon fiber‐reinforced polyetheretherketone composites

Research on low‐velocity impact resistance of carbon fiber composite laminates

The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

Experimental study of the importance of fibre breakage on the strength of thermoplastic matrix composites subjected to compression after impact

On multiple low-velocity impact response and compression after impact of composite laminates

Experimental investigation on the damage accumulation mechanism of 3D orthogonal woven composites under Repeated low-velocity impacts

Research on Low-Velocity Impact Response of Novel Short-Fiber-Reinforced Composite Laminates

Low-Velocity Impact and Post-Impact Residual Flexural Properties of Kevlar/EP Three-Dimensional Angle-Interlock Composites

Effect of impact position on the mechanical response and viscoelastic behavior of double‐blade composite stiffened structures

Low‐velocity multiple impact damage characteristics and numerical simulation of carbon fiber/epoxy composite laminates