The behaviour of thermoplastic and thermoset carbon fibre composites subjected to low-velocity and high-velocity impact

Haibao Liu,Jun Liu,Yuzhe Ding,Jie Zheng,Xiangshao Kong,Jin Zhou,Lee Harper,Bamber R. K. Blackman,Anthony J. Kinloch,John P. Dear
DOI: https://doi.org/10.1007/s10853-020-05133-0
IF: 4.5
2020-09-01
Journal of Materials Science
Abstract:Abstract The present paper describes the results from experimental and theoretical modelling studies on the behaviour of continuous carbon fibre/polymer matrix composites subjected to a relatively low-velocity or high-velocity impact, using a rigid, metallic impactor. Drop-weight and gas-gun tests are employed to conduct the low-velocity and high-velocity impact experiments, respectively. The carbon fibre composites are based upon a thermoplastic poly(ether–ether ketone) matrix (termed CF/PEEK) or a thermoset toughened epoxy matrix (termed CF/Epoxy), which has the same fibre architecture of a cross-ply [0 3 /90 3 ] 2s lay-up. The studies clearly reveal that the CF/PEEK composites exhibit the better impact performance. Also, at the same impact energy of 10.5 ± 0.3 J, the relatively high-velocity test at 54.4 ± 1.0 m s −1 leads to more damage in both types of composite than observed from the low-velocity test where the impactor struck the composites at 2.56 m s −1 . The computationally efficient, two-dimensional, elastic, finite element model that has been developed is generally successful in capturing the essential details of the impact test and the impact damage in the composites, and has been used to predict the loading response of the composites under impact loading.
materials science, multidisciplinary
What problem does this paper attempt to address?
The paper attempts to address the issue of evaluating the behavior of continuous carbon fiber-reinforced thermoplastic and thermosetting polymer matrix composites under low-velocity and high-velocity impacts. Specifically, the researchers aim to compare the damage performance and impact resistance of two types of composites (i.e., thermoplastic composites based on polyether ether ketone (PEEK) (CF/PEEK) and thermosetting composites based on toughened epoxy resin (CF/Epoxy)) under different impact energies and velocities through experimental and theoretical modeling. ### Main Research Questions: 1. **Behavioral Differences under Low-Velocity and High-Velocity Impacts**: The researchers aim to understand the behavioral differences of these two composites under low-velocity (e.g., drop-weight tests) and high-velocity (e.g., gas gun tests) impacts. 2. **Impact of Energy and Velocity on Damage**: The researchers seek to explore the impact of different impact energies and velocities on the damage extent of the composites through experimental data. 3. **Accuracy of Numerical Simulation**: The researchers have also developed a 2D elastic finite element model to simulate and predict the response of composites under impact loading and to verify the accuracy of this model. ### Specific Research Content: - **Experimental Methods**: - **Low-Velocity Impact Tests**: Conducted using drop-weight test equipment, with impact energy ranging from 4.5 to 10.5 Joules and impact velocities of 1.68, 2.16, and 2.56 meters/second. - **High-Velocity Impact Tests**: Conducted using gas gun test equipment, with an impact energy of 10.5 Joules and an impact velocity of approximately 54.4 meters/second. - **Materials**: - The study focuses on CF/PEEK and CF/Epoxy composites with the same fiber arrangement ([0³/90³]₂s). - **Detection Methods**: - Visual inspection and ultrasonic C-scan are used to detect post-impact damage. - 3D digital image correlation (DIC) technology combined with a high-speed camera is used to measure the out-of-plane displacement of specimens under high-velocity impact. Through these experiments and analyses, the researchers hope to provide valuable references for the impact resistance performance of composites in practical applications.