Abstract:The homogeneity of the magnetic field generated by a coil inside a magnetic shield is essential for many applications, such as ultra-low field nuclear magnetic resonance or spin precession experiments. In the course of upgrading the Berlin Magnetically Shielded Room (BMSR-2) with a new inserted Permalloy layer of side length 2.87 m, we designed a built-in coil consisting of four identical square windings attached to its inside walls. The spacings of the four windings were optimized using a recently developed semi-analytic model and finite element analysis. The result reveals a strong dependence of the field homogeneity on the asymmetric placement of the inner two windings and on the chosen material permeability value μs. However, our model calculations also show that these experimental variations can be counterbalanced by an adjustment of the inner winding positions in the millimeter range. Superconducting quantum interference device-based measurements yield for our implementation after fine adjustments of a single winding position a maximum field change of less than 10 pT for a total field of B0 = 2.3 µT within a 10 cm region along the coil axis, which is already better than the residual field of the upgraded BMSR-2.1 after degaussing. Measurements of free spin precession decay signals of polarized Xe129 nuclei show that the transverse relaxation time for the used cell is not limited by the inhomogeneity of the new built-in coil system.

Magnetic Field Stabilization for Magnetically Shielded Volumes by External Field Coils

A large 'Active Magnetic Shield' for a high-precision experiment

Generating a highly uniform magnetic field inside the magnetically shielded room of the n2EDM experiment

Dynamic stabilisation of magnetic fields measured inside a magnetically shielded room using an external coil system

Hybrid setup for stable magnetic fields enabling robust quantum control

Sensitivity of Fields Generated within Magnetically Shielded Volumes to Changes in Magnetic Permeability

Achieving ultra-low and -uniform residual magnetic fields in a very large magnetically shielded room for fundamental physics experiments

Degaussing Procedure and Performance Enhancement by Low-Frequency Shaking of a 3-Layer Magnetically Shielded Room

A High Stability Magnetic Field Applied in Atomic Magnetometer System

A magnetically shielded room with ultra low residual field and gradient

A Method for Stabilizing Magnetic Field

Active stabilization of kilogauss magnetic fields to the ppm level for magnetoassociation on ultranarrow Feshbach resonances

A Built-in Coil System Attached to the Inside Walls of a Magnetically Shielded Room for Generating an Ultra-High Magnetic Field Homogeneity.

Development of a Real-Time Magnetic Field Measurement System for Synchrotron Control

Active Magnetic-Field Stabilization with Atomic Magnetometer

A NEW HELMHOLTZ COIL PERMANENT MAGNET MEASUREMENT SYSTEM

Bi-planar magnetic stabilisation coils for an inertial sensor based on atom interferometry

Pulsed-Mode Magnetic Field Measurements with a Single Stretched Wire System

Benchtop magnetic shielding for benchmarking atomic magnetometers

Fast Degaussing Procedure for a Magnetically Shielded Room