Abstract:Many engineering components, such as steam turbine rotor systems, outer shell of nuclear reactors, or even solder connection in electronic packing, are prone to thermal fatigue under service condition. As their working temperatures are relative high, they may also endure creep damage. Up till now the most common way to treat the fatigue-creep problem is to make a simple linear superposition of the individual effects. However, the interaction between creep and fatigue is proved to be an important factor in engineering safety design[1]. It is also a very complex and difficult problem for researchers in the relative fields. In the present work, an analytical micromechanics model is proposed to describe the influence and interaction of fatigue and creep. Here, a recently proposed fatigue crack growth model[2] is adopted which views the fatigue crack growth process as the intermissive elastic cleavage fracture of the dislocation free zone (DFZ). The effects of cyclic loading make the plastic zone hardening (or softening), thus raise the stress level in DFZ and bring it to fracture. The calculated dN dc / curves exhibit three different stages of fatigue crack growth which is in general agreement with the experimental observation. In applying that model to thermal fatigue, we consider the following thermal loading condition (fig. 1). Here we suppose that, compared with the holding period at high temperature, the period of increasing and decreasing temperature is rather short, and the creep during that period may be neglected.

Thermodynamic Investigation with Synergetic Method on Inner Crack Growth Behavior at Very High Cycle Fatigue Regime

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Quantitative Assessment of Microstructural Damage for Interior Crack Initiation and High Cycle Fatigue Life Modeling

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime

Experimental Study and Numerical Simulation on High Temperature & Low Cycle Short Fatigue Cracks under Multiaxial Stress States

A fatigue life prediction approach to interior cracking induced high cycle and very high cycle fatigue for surface‐carburized steels

Fatigue Life and Mechanistic Modeling of Interior Micro-Defect Induced Cracking in High Cycle and Very High Cycle Regimes

A microscopic mechanics model of crack growth with fatigue-creep interaction

A combined cyclic viscoplasticity and entropy generation approach for modelling fatigue crack growth behavior of nickel-based superalloy at high temperature

A Plastic Fracture Mechanics Model for Characterization of Multiaxial Low-Cycle Fatigue

Development of Analogy Method for Thermal-Fatigue Crack Propagation in Pressurized Cylinder by Using Permeation Diffusion-Fracture Model

Application of inverse heat transfer to fatigue fracture

Experimental investigation and crystal plasticity simulation for the fatigue crack initiation of the equiaxed Ti-6Al-4V alloy in the very high cycle regime

Fatigue life prediction of Ti60 titanium alloy under very high cycle loading at different temperatures

A synchronous thermal-mechanical in-situ device for dynamic fracture initiation

Multi-axial Creep-Fatigue Analysis of a Cracked Groove Structure Subjected to Cyclic Thermal Loading

The Effect of Stress Ratios on the Very High Cycle Fatigue Behavior of 9%Cr Turbine Steel at 630 °C

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

High cycle thermal fatigue of two austenitic stainless steels

Assessment of Crack-Tip Fields of Thermo-Mechanical Elastoplastic Fatigue Crack Growth