Abstract:The crystal structures and phase compositions of Ti0.7Zr0.(3)(Cr1-xVx)(2) (x=0.1, 0.2, 0.3, 0.4) alloys are analyzed by the XRD and SEM. The hydrogen storage properties, activation performance, thermodynamics and high-temperature desorption process of the alloys are investigated by pressure-composition-temperature (P-C-T) and DTA-TG measurements. The results show that the Ti-0.7,Zr-0.3(Cr1-xVx)(2) alloys contain multi-phases, i.e. C36 (P6(3)/mmc) and C15 (Fd3m) Laves phases and V-based bcc solid solution phases with different lattice constants. When the content of V in the alloy is low, the alloy basically consists Of C36 type of Laves phase and small amount of bcc solid solution phase. As the content of V increases, the C36 type transfers into C15 type of Laves phase, where the probability of forming third type of stacking layers (C layers) increases, and the content of the bcc solid solution also increases. The alloys in bulk can be easily activated at 2 MPa and room temperature. The x=0.1, 0.2 alloys present excellent activation performance even after exposure in air for 20 d. As V content increases, the hydrogen absorption capacity of the alloy increases whereas the plateau pressure decreases. The relative partial molar enthalpy (Delta E) and entropy (Delta S) of hydrogen absorption for the alloys are found to be in the ranges of-7 similar to-28 kJ/mol and 35 95 J/(mol center dot K). The DTA-TG analysis indicates that the hydrogen release from the hydrides of the alloys occur in two dissolving temperatures within the range of 500 similar to 600 K, and some residual hydrides have completely decomposed at heating temperature up to 800 K.

Crystal Structure and Protium Absorption Properties of Ti-Cr-X Alloys

Phase Structures and Hydrogen Storage Properties of TiV1.35Cr1.35-xMnx Alloys(x=0～0.45)

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Phase structures and hydrogen storage properties

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Diffusion and Retention of Hydrogen in Vanadium in Presence of Ti and Cr: First-principles Investigations

Effect of Cr content on hydrogen storage properties for Ti-V-based BCC-phase alloys

Effect of zr content on the microstructures and hydrogen storage properties of (Ti-Cr)(45-x)V55Zrx (x=1 similar to 7) alloys

Effect of Zr Content on the Microstructures and Hydrogen Storage Properties of (Ti-Cr)_(45-x)V_(55)Zr_x(x=1～7) Alloys

Phase Structure and Hydrogen Storage Properties of Ti17cr23v55-Xzr5fex (X=11 Similar to 16) Alloys

Influence of Partial Substitution of Mo for Cr on Structure and Hydrogen Storage Characteristics of Non-Stoichiometric Laves Phase TiCrB0.9 Alloy

First principles calculation on electronic structures and mechanical properties of TiCrTaV high–entropy alloy

EFFECT OF Cr CONTENT ON THE SORPTION PERFORMANCE OF TiMn_(1.2-x)Cr_xV_(0.25)Fe_(0.05) ALLOYS

Effect of Cr Content on the Sorption Performance of Timn1.2-Xcrxv0.25fe0.05

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

MICROSTRUCTURES AND HYDROGEN STORAGE PROPERTIES OF Ti0.7Zr0.3(Cr1-xVx)2 ALLOYS

Effects of Cr and W in TiMoNb Refractory High Entropy Alloys

Enhanced hydrogen storage properties of Ti–Cr–Nb alloys by melt-spin and Mo-doping

Crystal structure and bonding characteristics of transformation products of bcc β in Ti-Mo alloys

TiCr<sub>1.2</sub>(V–Fe)<sub>0.6</sub>—a novel hydrogen storage alloy with high capacity