Abstract:Lead-acid batteries need to evolve to keep up with the electrification of vehicles and not lose ground to other technologies. The grid designed using a lead alloy thus plays a very important role in the performance of the battery, as, in the course of the various cycles, this component undergoes a natural corrosion process at positive potential, while immersed in a sulfuric acid solution. The aim of this study is therefore to examine the effect of the addition of calcium and bismuth on the microstructure, mechanical behavior and corrosion resistance of the Pb1.5%Sn alloy, with a view to using this in the positive grid of lead-acid batteries. The alloys developed during this study were evaluated using optical microscopy and scanning electron microscopy. Mechanical properties were investigated using universal tensile and hardness tests. Electrochemical tests of cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy were carried out in a 5M sulfuric acid solution at 25 °C to simulate the behavior of the alloy when in operation. The composition of the corrosion products formed were subsequently characterized by morphological analysis using scanning electron microscopy and the composition was determined using energy dispersive X-ray spectroscopy and X-ray diffraction analysis. The results indicate that the Pb1.5Sn0.12Bi alloy presented better corrosion resistance characteristics than the Pb1.5Sn0.05Ca alloy, making it suitable for inclusion in the composition of the positive electrode of a lead-acid battery. Further investment is however required to compensate for the shortcomings in relation to the mechanical properties of the material.

Improving Corrosion Resistance of Lead-Alloy Positive Grid of Lead-Acid Battery by an Electrochemical Prepassivation Interphase

Performance Study of Large Capacity Industrial Lead‑carbon Battery for Energy Storage

Construction of conductive oxide layer on the surface of lead alloy grid for the long life of lead acid batteries

Advances and challenges in improvement of the electrochemical performance for lead-acid batteries: A comprehensive review

Reconstruction of Lead Acid Battery Negative Electrodes after Hard Sulfation Using Controlled Chelation Chemistry

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

In-situ carbon encapsulated Pb/PbO nanoparticles derived from spent lead paste for lead-carbon battery

The Influences of Silver and Zinc Addition on the Electrochemical Performances of the Pb–Ca–Sn Grids for Lead Acid Batteries

Aluminum corrosion–passivation regulation prolongs aqueous batteries life

A Review of the Positive Electrode Additives in Lead-Acid Batteries

The Proactive Maintenance for the Irreversible Sulfation in Lead-Based Energy Storage Systems with a Novel Resonance Method

Improving the performance of recovered lead oxide powder from waste lead paste as active material for lead‐acid battery

Development of titanium-based positive grids for lead acid batteries with enhanced lightweight, corrosion resistance and lifetime

A corrosion inhibiting layer to tackle the irreversible lithium loss in lithium metal batteries

Bifunctional Alloy/Solid-Electrolyte Interphase Layer for Enhanced Potassium Metal Batteries Via Prepassivation

Anodic Behavior of Lead Alloy with Rare Earth Additive in Sulfuric Acid Solution

Passivation and corrosion of Al current collectors in lithium-ion batteries

An innovative synergistic recycling route of spent lead paste and lead grid based on sodium nitrate reuse

Interfacial passivation by room-temperature liquid metal enabling stable 5 V-class lithium-metal batteries in commercial carbonate-based electrolyte

A facile route to search antioxidant additives for dry charged negative plate of the lead acid battery

The effect of Ca and Bi addition on the mechanical strength, corrosion resistance, and Rechargeability of Pb1.5Sn alloy for the positive grid of lead-acid batteries