Abstract:Amorphous metal-oxide semiconductors (AOSs) such as indium-gallium-zinc-oxide (IGZO) as an active channel have attracted substantial interests with regard to high-performance thin-film transistors (TFTs). Recently, intensive and extensive studies of flexible and/or wearable AOS-based TFTs fabricated by solution-process have been reported for emerging approaches based on device configuration and fabrication process. However, several challenges pertaining to practical and effective solution-process technologies remain to be resolved before low-power consuming AOS-based TFTs for wearable electronics can be realized. In this paper, we investigate the non-thermal annealing processes for sol-gel based metal-oxide semiconductor and dielectric films fabricated by deep ultraviolet (DUV) photo and microwave annealing at low temperature, compared to the conventional thermal annealing at high temperature. A comprehensive investigation including a comparative analysis of the effects of DUV photo and microwave annealing on the degree of metal-oxide-metal networks in amorphous IGZO and high-dielectric-constant (high-k) aluminum oxide (Al2O3) films and device performance of IGZO-TFTs in a comparison with conventional thermal annealing at 400 °C was conducted. We also demonstrate the feasibility of wearable IGZO-TFTs with Al2O3 dielectrics on solution-processed polyimide films exhibiting a high on/off current ratio of 5 × 104 and field effect mobility up to 1.5 cm2/V-s operating at 1 V. In order to reduce the health risk and power consumption during the operation of wearable electronics, the operating voltage of IGZO-TFTs fabricated by non-thermal annealing at low temperature was set below ~1 V. The mechanical stability of wearable IGZO-TFTs fabricated by an all-solution-process except metal electrodes, against cyclic bending tests with diverse radius of curvatures in real-time was investigated. Highly stable and robust flexible IGZO-TFTs without passivation films were achieved even under continuous flexing with a curvature radius of 12 mm.

High Mobility, Low Off-Current, and Flexible Fiber-Based a-InGaZnO Thin-Film Transistors toward Wearable Textile OLED Displays

Highly Transparent and Flexible Fabric-Based Organic Light Emitting Devices for Unnoticeable Wearable Displays

Multi-directionally wrinkle-able textile OLEDs for clothing-type displays

Anode‐Patterned Monorail‐Structure Fiber‐Based Organic Light‐Emitting Diodes with Long Lifetime and High Performance for Truly Wearable Displays

Wearable 1 V operating thin-film transistors with solution-processed metal-oxide semiconductor and dielectric films fabricated by deep ultra-violet photo annealing at low temperature

Bright‐Multicolor, Highly Efficient, and Addressable Phosphorescent Organic Light‐Emitting Fibers: Toward Wearable Textile Information Displays

Printable Semiconductors for Backplane TFTs of Flexible OLED Displays

Foldable and washable textile-based OLEDs with a multi-functional near-room-temperature encapsulation layer for smart e-textiles

Oxide TFT with multilayer gate insulator for backplane of AMOLED device

RGB‐Color Textile‐Based Flexible and Transparent OLEDs Considering Aesthetics

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

Oxide-Semiconductor-Based TFTs for Displays and Flexible Electronics

Bendable metal oxide thin-film transistors and circuits for analog electronics applications

Amorphous IGZO TFT with High Mobility of ~70 cm2/Vs via Vertical Dimension Control using PEALD.

Transparent and conformable organic light-emitting diodes for skin-attachable invisible displays

Highly Flexible Fabric‐Based Organic Light‐Emitting Devices for Conformal Wearable Displays

Organic thin-film transistors for organic light-emitting flat-panel display backplanes

15.2: Invited Paper: Atomic Layer Deposited Oxide Semiconductor Enabling High Mobility and Low Driving Voltage in TFTs

DC and AC Performance of InGaZnO Thin-Film Transistors on Flexible PEEK Substrate

Flexible IGZO Thin-Film Transistors and Inverter Circuits with Diode-Connected Transistors Fabricated on Transparent Polyimide Substrates

Thin Film Transistor Using Amorphous InGaZnO Films as Both Channel and Source/Drain Electrodes