Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Highly porous activated carbons from resource-recovered Leucaena leucocephala wood as capacitive deionization electrodes

Highly porous activated carbon with multi-channeled structure derived from loofa sponge as a capacitive electrode material for the deionization of brackish water

Porous Carbon Electrodes from Activated Wasted Coffee Grounds for Capacitive Deionization

Unleashing the power of capacitive deionization: Advancing ion removal with biomass-derived porous carbonaceous electrodes

Electrochemical capacitive desalination behavior of activated carbon fibers

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

Laser-induced nitrogen and phosphorus-doped spongy carbon with graphene wings derived from lignin for significantly enhanced capacitance deionization performance

Oaks-derived activated carbon by trace alkali-induced catalytic steam activation for electrochemical capacitor applications

Enhanced capacitive deionization of toxic metal ions using nanoporous walnut shell-derived carbon

Chitosan-based Activated Carbon As Economic and Efficient Sustainable Material for Capacitive Deionization of Low Salinity Water.

GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Integrated hierarchical porous lignin-based carbon electrode for boosting membrane-free capacitive deionization areal adsorption capacity

Porous Biomass Carbon Coated with SiO2 as High Performance Electrodes for Capacitive Deionization

Honeycomb-like Hierarchical Porous Activated Carbons from Biomass Waste with Ultrahigh Specific Surface Area for High-Rate Electrochemical Capacitors

Platanus acerifolia (Aiton) Willd. fruit-derived nitrogen-doped porous carbon as an electrode material for the capacitive deionization of brackish water

A novel layered activated carbon with rapid ion transport through chemical activation of chestnut inner shell for capacitive deionization

High-Performance Capacitive Deionization by Lignocellulose-Derived Eco-Friendly Porous Carbon Materials

Efficient Capacitive Deionization Using Natural Basswood-Derived, Freestanding, Hierarchically Porous Carbon Electrodes

Pine-derived porous carbon for efficient capacitive deionization and the role of its hierarchical pore structure

The Effect of the Ratio of KOH to Carbon on the Pore Structure and the Capacitance Characteristic of Activated Carbon

Corncob-Derived Activated Carbon as Electrode Material for High-Performance Supercapacitor