Abstract:Electric arc furnace dust (EAFD) is a hazardous solid waste generated as a byproduct in the steelmaking process, containing significant amounts of zinc and iron, making it a primary secondary source of zinc. The separation of zinc and iron in an environmentally-friendly and efficient manner poses a crucial technological challenge for the safe disposal and resource utilization of EAFD, facilitating the recovery of valuable zinc and the direct reuse of iron as raw materials for ironmaking. In this study, a novel method for restructuring zinc-bearing phases into sulfated compounds through low-temperature roasting by introducing FeS in EAFD were proposed. Simultaneously, the iron-containing phases undergo a transformation into Fe 2 O 3 . Subsequently, efficient separation of zinc and iron is achieved through a leaching process using dilute sulfuric acid. The conditions for the theoretical transformation of zinc-containing phases into ZnSO 4 and iron-containing phases into Fe 2 O 3 in EAFD were determined by thermodynamic calculations incorporating FeS. The temperature range for sulfation calcination was determined to be within 550–700 °C based on TG-DSC analysis and the evaluation of SO 2 release during the decomposition of FeS. The optimal conditions for the roasting process were determined as an E/F ratio of 1:3, a temperature of 650 °C, and a duration of 3 h. In addition, the optimal conditions for the leaching process were determined as the addition of 1 mL of 1 M H 2 SO 4 and a liquid–solid ratio of 25 mL/g. Under these conditions, the extractions of Zn and Fe reached 95.33 % and 0.17 %, respectively. The mechanism of phase reconstruction from zinc-containing phases to sulfate phases in EAFD was thoroughly analyzed, revealing that the Zn species in EAFD were transformed into Zn 3 O(SO 4 ) 2 through solid–solid and gas–solid reactions, while the majority of Fe species in EAFD and FeS were converted into Fe 2 O 3 . Effective separation of zinc and iron was achieved by dissolving Zn 3 O(SO 4 ) 2 in diluted sulfuric acid while retaining Fe 2 O 3 in the residue. This study provides a fresh perspective on the recovery of zinc from zinc-containing solid waste resources, offering significant potential for the sustainable management and utilization of EAFD.

Magnetic Ni-Zn spinel ferrite nanopowder from toxic Zn-bearing electric arc furnace dust: A promising treatment process

Reclamation of acid pickling waste: A facile route for preparation of single-phase Fe 3 O 4 nanoparticle

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Alkaline steaming-assisted conversion: a new strategy for the synthesis of pure NiFe2O4 and CoFe2O4 spinel ferrite nanoparticles

FeS-assisted restructuring of zinc-bearing phases into sulfated compounds for efficient zinc extraction from hazardous electric furnace dust

Microwave-intensified treatment of low-zinc EAF dust: A route toward high-grade metallized product with a focus on multiple elements

A high-efficiency separation process of Fe and Zn from zinc-bearing dust by direct reduction

Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust – A review

Recycling spent zinc manganese dioxide batteries through synthesizing Zn-Mn ferrite magnetic materials

Synthesis of hard magnetic NdFeB composite particles by recycling the waste using microwave assisted auto-combustion and reduction method

Pyrometallurgical Technology for Extracting Iron and Zinc from Electric Arc Furnace Dust

Mechanical activation induced treatment for the synergistic recovery of valuable elements from spent NdFeB magnets

High-Coercivity Nanocrystalline Nd-Fe-B Powder Regenerated from Sludge via In-Situ Mechanochemical Approach

Preparation of nano zinc oxide by alkaline treatment of industrial zinc oxide dust

Design and preparation of FeNiCoCrY high-entropy alloy nanopowders with sustained, efficient and rapid degradation properties of CR and Cr(VI) wastewater

Influencing Factors on the Melting Characteristics of NdFeB-Based Production Wastes for the Recovery of Rare Earth Compounds

Effect of in-situ oxidation on the phase composition and magnetic properties of Fe3O4: Implications for zinc hydrometallurgy

Mineral Phase Reconstruction and Separation Behavior of Zinc and Iron from Zinc-Containing Dust

Enhancing low-field magnetoresistance in magnetite nanoparticles via zinc substitution.

A Novel Technique for the Preparation of Iron Carbide and Carbon Concentrate from Blast Furnace Dust