Abstract:The demand for NdFeB permanent magnets, known as the strongest permanent magnets on the market, is projected to rise significantly. These magnets, made from rare earth elements (REEs) such as neodymium (Nd), praseodymium (Pr), and dysprosium (Dy), are essential for various high-tech applications, including electric motors for e-mobility, wind turbines, electronics, and air conditioners. However, their production is heavily reliant on REEs—classified as critical raw materials in the EU due to limited geographic availability and supply risks. Over 60% of global REE production occurs in China, which also controls 91% of REEs refinement and 94% of the permanent magnet market. Given Europe’s lack of internal REEs production and refining capabilities, this dependency on Chinese imports poses a supply risk. To address this problem, Europe must establish alternative REE sources, either by exploiting local mines or implementing recycling. Projections indicate that by 2050, recycling could potentially meet up to 75% of Europe’s REE demand. However, current recycling efforts are limited, with less than 1% of REEs being recovered. This study aims to investigate a recycling method capable of recovering REEs, particularly from NdFeB magnets embedded within electric motors from e-mobility. The focus centers on a mechanical pretreatment approach that combines shredding with physical separation techniques, such as magnetic separation. The primary objective is to isolate a NdFeB-enriched fraction—a material stream containing a substantially higher concentration of NdFeB magnets than the original motor composition. An industrial-scale trial was conducted on electric motors that were initially thermally demagnetized. This demagnetization step is crucial to mitigate issues related to magnet agglomeration during subsequent mechanical processing. The demagnetized motors were then shredded and processed via magnetic separation within an industrial facility. The separated fractions were subjected to laboratory pretreatment, involving sample homogenization, sieving, and magnetic attraction, to concentrate the NdFeB content. The samples were analyzed through MP-AES to quantify the REE content, including Nd, Pr, Ce, Dy, and Gd. This data provided insights into the enrichment of NdFeB magnets in the treated fraction. A material flow analysis (MFA) was conducted to assess the distribution of magnets throughout the process. The MFA revealed that 71.3% of magnets entering the treatment facility were retained in the ferrous fraction, while 28.3% were found in the non-ferrous fraction. The ferromagnetic properties of the NdFeB magnets facilitated their attraction to the magnetic separator, enhancing the concentration of magnets in the ferrous fraction. A significant increase was observed in the magnet concentration in the non-ferrous fraction after additional magnetic separation, with the concentration rising from 9.47% in the initial non-ferrous fraction to 50.8% in the final attracted fraction. The findings of the study provided key information for the future design of an optimized mechanical pretreatment process that could achieve both a higher concentration of NdFeB magnets and an improved process yield.

Mechanical activation induced treatment for the synergistic recovery of valuable elements from spent NdFeB magnets

Efficient recovery of rare earth elements from discarded NdFeB magnets by mechanical activation coupled with acid leaching

Recent advances in electrochemical recovery of rare earth elements from NdFeB magnets

Recovery and separation of rare earths and boron from spent Nd-Fe-B magnets

Hydrometallurgical Recovery of Rare Earth Elements from NdFeB Permanent Magnet Scrap: A Review

Separation and Recovery of Rare Earths and Iron from NdFeB Magnet Scraps

Selective extraction and separation of REEs from NdFeB magnets scrap using co-chlorination and water leaching

ZnCl2: A Green Brønsted Acid for Selectively Recovering Rare Earth Elements from Spent NdFeB Permanent Magnets

Efficient Recovery of End-of-Life NdFeB Permanent Magnets by Selective Leaching with Deep Eutectic Solvents

Recovery of rare earths from spent NdFeB magnets of wind turbine: Leaching and kinetic aspects

Recovery of Rare Earth Elements from Spent NdFeB Magnets: Metal Extraction by Molten Salt Electrolysis (Third Part)

Selective extraction of rare earth elements and cobalt from iron residue containing rare earth using mechanical activation and reductive leaching method

Selective separation of rare earths from spent Nd-Fe-B magnets using two-stage ammonium sulfate roasting followed by water leaching

Electrochemical leaching of rare-earth elements from spent NdFeB magnets

Study of the Mechanical Recycling Process of Electric Motors for the Recovery and Valorization of NdFeB Magnet Content

Mass production of regenerated sintered NdFeB magnets with improved magnetic properties compared to original magnets

A cleaner and sustainable method for recovering rare earth and cobalt from NdFeB leaching residues

A One-Pot Process Based on P44414Cl-HCl Aqueous Biphasic System for Recovering Rare Earth Elements from NdFeB Permanent Magnet

A green process for selective REEs recovery from Rare earth waste through mechanochemical activation

Oxidative Roasting–Selective Pressure Leaching Process for Rare Earth Recovery from NdFeB Magnet Scrap

Recovery of high-value rare earth elements from waste NdFeB by the water-soluble ammonium salt [Hbet]cl