Abstract:Due to the high modulus, high strength, low density, excellent wear resistance and good neutron absorption, the boron carbide (B4C) particle reinforced aluminum (Al) matrix composites have been widely applied in the aerospace, weaponry, transportation and neutron shielding fields. In response to the increasing requirement of better strength -ductility matching of B4C/Al composites, introducing a nano-scale reinforcement into the B4C/Al composites becomes an attractive research focus. In this work, the SiC nanowires were ball-milled with Al powders, and then the SiC/Al composite powders were mixed with B4C microparticles. Thus, the 15vol. % B4C/SiC/Al composites with different volume fractions of SiC nanowires were fabricated by hot-pressing sintering and hot extrusion. B4C microparticles and SiC nanowires are uniformly dispersed in the B4C/SiC/Al composites, while the introduced SiC nanowires effectively decrease the Al matrix grain sizes. B4C/SiC/Al composites produce the better strength-ductility matching than that of B4C/Al composites, while the 15vol. % B4C/SiC/Al composite with 1vol. % SiC nanowires achieved the best strength-ductility matching. It generates the 281.7 ± 2.7 MPa in yield strength, 351.2 ± 0.1 MPa in ultimate tensile strength and 5.9 ± 0.7% in failure elongation, which are increased by 18.2%, 15.1% and 13.5% compared to the B4C/Al composites. Uniformly dispersed B4C microparticles and SiC nanowires largely block the dislocation motions and improve the dislocation storage capacity, which results in a more significant hetero-deformation induced (HDI) hardening effect in the B4C/SiC/Al composites. Moreover, the B4C/Al interfacial transition regions with the added SiC nanowires becomes stronger, which can enhance the load transfer efficiency of the B4C/Al interfaces as a result of the existing dislocation hardening zones. In conclusion, it is a good strategy to combine the synergistic strengthening effect of micro-scale and nano-scale reinforcements in the metal matrix composites.

Strengthening mechanisms and wear performance of Al/APC/micro-B 4 C p hybrid composites prepared by HTCDC process and hot extrusion

Microstructure, mechanical and tribological properties of APC/Al laminated composites prepared by hydrothermal carbon adsorption on plates

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructure and Mechanical Properties of ABOw and Nickel-Coated MWCNTs Reinforced 2024al Hybrid Composite Fabricated by Squeeze Casting

Mechanical Characteristics and Wear Behaviour of Al/SiC and Al/SiC/B4C Hybrid Metal Matrix Composites Fabricated Through Powder Metallurgy Route

Design a novel APC/A6061 laminated composite with high wear resistance

Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites

Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites

Preparation of B4Cp/Al Composites via Selective Laser Melting and Their Tribological Properties

Synergistic effects of TiC and graphene on the microstructure and tribological properties of Al2024 matrix composites

Microstructures and mechanical properties of Al nanocomposites hybrid-reinforced with B4C, carbon nanotubes and graphene nanoplatelets

Tribological behavior of high-entropy alloy particle reinforced aluminum matrix composites and their key impacting factors

Effect of B4C and SiC nanoparticle reinforcement on the wear behavior and surface structure of aluminum (Al6063-T6) matrix composite

Tribological and Structural Effects of Titanium Carbide and Hexagonal Boron Nitride Reinforcement on Aluminum Matrix Hybrid Composites

Wear behaviour of aluminium-based hybrid composites processed by equal channel angular pressing

Processing and Evaluation of Mechanical Properties and Dry Sliding Wear Behavior of AA6061-B4C Composites

Microstructure and Mechanical Property of the 2024al Matrix Hybrid Composite Reinforced with Recycled SiCp/2024Al Composite Particles

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Dry sliding wear behavior of titanium matrix composites hybrid-reinforced by in situ TiBw and TiCp

Tribological Behavior of Short Carbon Fiber or Hybrid with SiCp Reinforced Al Alloy Composites

Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites