Abstract:Abstract Microstructure control in metal additive manufacturing is highly desirable for superior and bespoke mechanical performance. Engineering the columnar-to-equiaxed transition during rapid solidification in the additive manufacturing process is crucial for its technological advancement. Here, we report a powder-size driven melt pool engineering approach, demonstrating facile and large-scale control in the grain morphology by triggering a counterintuitive response of powder size to the additively manufactured 316 L stainless steel microstructure. We obtain coarse-grained (>100 μm) or near-monocrystalline microstructure using fine powders and near-equiaxed, fine-grained (<10 μm) microstructure using coarse powders. This approach shows resourceful adaptability to directed energy deposition and powder-bed fusion with no added cost, where the particle-size dependent powder-flow preheating effects and powder-bed thermophysical properties drive the microstructural variations. This work presents a pathway for leveraging feedstock particle size distribution towards more controllable, cost-effective, and sustainable metal additive manufacturing.
What problem does this paper attempt to address?
This paper attempts to address the issue of microstructure control in the process of metal additive manufacturing (AM). Specifically, the authors investigate how to regulate melt pool characteristics through powder size to effectively control the grain morphology and size of 316L stainless steel material during the additive manufacturing process. This study aims to improve the mechanical properties of additive manufacturing components and make their mechanical behavior predictable.
### Background of the Paper
- **Importance of the Issue**: In metal additive manufacturing, the control of microstructure is crucial for obtaining superior and customized mechanical properties. Particularly, in the rapidly solidifying additive manufacturing process, the engineering design of the columnar-to-equiaxed transition (CET) is especially critical for technological advancement.
- **Limitations of Existing Methods**: Current methods to achieve CET include changing processing conditions, laser beam shaping, alloy composition redesign, nanoscale heterogeneous nucleation, grain refinement induced by high-intensity ultrasound, and post-processing driven recrystallization. Although these methods are effective, they require additional experimental effort and cost, and lack adaptability to directed energy deposition (DED) and powder bed fusion (PBF) processes.
### Research Objectives
- **Proposed New Method**: The authors propose a melt pool engineering (MPE) method based on powder size, which achieves large-scale control of grain morphology by controlling powder size. This method can achieve coarse grains (>100 μm) or near-single-crystal microstructures (using fine powder) and fine grains (<10 μm) or near-equiaxed microstructures (using coarse powder) without increasing costs.
- **Scope of Application**: This method is applicable to DED and PBF processes, requires no additional cost, and can utilize particle size distribution to achieve more controllable, economical, and sustainable metal additive manufacturing.
### Main Findings
- **Effect of Powder Size on Melt Pool**: Through experiments and simulations, the authors found that powder size and speed affect the geometry of the melt pool, which in turn affects its solidification results. Specifically, fine powder leads to coarse grains or near-single-crystal microstructures, while coarse powder leads to fine grains or near-equiaxed microstructures.
- **Bidirectional Control**: By adjusting powder size, bidirectional control from columnar to equiaxed grains can be achieved, which has been validated in the E-PBF process.
- **Mechanical Properties**: By controlling the microstructure, the mechanical properties of the material can be significantly improved, such as increased crack resistance and isotropic mechanical response.
### Experimental Methods
- **L-DED Process**: By systematically changing the powder size, the effect of powder size on the geometry of the melt pool and microstructure was studied. The experimental results showed that fine powder and coarse powder led to different grain morphologies, respectively.
- **E-PBF Process**: Through a machine learning framework and numerical simulations, the effect of powder size on the thermophysical properties of the powder bed was studied, further validating the effectiveness of the powder size-driven microstructure control method.
### Conclusion
- **Innovative Points**: This study proposes a new method to achieve effective control of the microstructure in the metal additive manufacturing process by controlling powder size, thereby improving the mechanical properties of the material and the economics of manufacturing.
- **Application Prospects**: This method is not only applicable to 316L stainless steel but may also be extended to other metal materials, providing a new approach for the widespread application of metal additive manufacturing.