Abstract:Metal-based additive manufacturing (AM) processes often produce parts with improved properties compared to conventional manufacturing and metal working routes. However, currently, only a few alloys can be reliably additively manufactured as the vast majority of the alloys in use today are not explicitly designed for this manufacturing route. This is because the highly non-equilibrium nature of melting and rapid solidification phenomena during AM leads to undesirable microstructures with complex growth morphologies and unpredictable microstructural inhomogeneities including solidification defects, leading to unwanted variability in final material properties. In this context, the review article discusses the underlying physical mechanisms of microstructure and associated defects formation during ultrarapid cooling rates typical of AM in order to suggest approaches to minimize and control microstructural heterogeneities for improved printability and microstructure robustness (and hence properties). In particular, the physical effects of cooling rates and alloy parameters on rapidly moving complex solid–liquid interface shapes and the nucleation behavior during non-steady thermal conditions in heterogeneous liquid during AM must be well-understood to control the solidification microstructure and grain morphology. Suitable integration of physics-rich macroscale melt-pool, microstructure, and atomic-scale nucleation models (but benchmarked by experimental measurements) could quantitatively simulate the above hierarchical AM solidification problems that extend across multiple length scales and associated chemical heterogeneities. To address the tremendous computational expense of the above solidification problems toward large part-scale or full-melt-pool simulation, exascale computing hardware and software has been leveraged as a part of the exascale computing project. Further, the AM solidification simulations would guide parameter-microstructure optimization via data-driven modeling and, ultimately, alloy and processing development to suit various envisaged applications in the AM community.

Mesostructure engineering in additive manufacturing of alloys

Additive manufacturing of alloys with programmable microstructure and properties

Tailoring Hierarchical Microstructures and Nanoprecipitates in Additive-Manufactured Al-Zn-Mg-Cu-Nb Alloys for Simultaneously Enhancing Strength and Ductility

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

Metallurgy and Solidification Microstructure Control of Fusion-Based Additive Manufacturing Fabricated Metallic Alloys: A Review

Additive Manufacturing of Metals: Microstructure Evolution and Multistage Control

About metastable cellular structure in additively manufactured austenitic stainless steels

Additive manufacturing of metals and alloys to achieve heterogeneous microstructures for exceptional mechanical properties

Modeling of hierarchical solidification microstructures in metal additive manufacturing: Challenges and opportunities

The Characteristic Microstructures and Properties of Steel-Based Alloy via Additive Manufacturing

Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing

In-Situ Tailoring Microstructures to Promote Strength-Ductility Synergy in Laser Powder Bed Fusion of Nicocr Medium-Entropy Alloy

Design of titanium alloys by additive manufacturing: A critical review

Formation Process and Mechanical Properties in Selective Laser Melted Multi-Principal-element Alloys

Control of Grain Structure, Phases, and Defects in Additive Manufacturing of High-Performance Metallic Components

Powder-size driven facile microstructure control in powder-fusion metal additive manufacturing processes

Remelting Induced Fully-Equiaxed Microstructures with Anomalous Eutectics in the Additive Manufactured Ni32Co30Cr10Fe10Al18 Eutectic High-Entropy Alloy

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing

Additively manufacturable high-strength aluminum alloys with thermally stable microstructures enabled by hybrid machine learning-based design

Design of graded lattice structure with optimized mesostructures for additive manufacturing

Densification, Microstructure, and Mechanical Properties of Additively Manufactured 2124 Al–Cu Alloy by Selective Laser Melting