Abstract:Frequently orthopedic surgeries require mechanical drilling processes especially for inserted biodegradable screws or removing small bone lesions. However mechanical drilling techniques induce large number of forces as well as have substantially lower material removal rates resulting in prolong healing times. This study focuses on analyzing the impact of quasi-continuous laser drilling on the bone's surface as well as optimizing the drilling conditions to achieve high material removal rates. An ex-vivo study was conducted on the cortical region of desiccated bovine bone. The laser-based drilling on the bovine bine specimens was conducted in an argon atmosphere using a number of laser pulses ranging from 100 to 15,000. The morphology of the resulting laser drilled cavities was characterized using Energy dispersive Spectroscopy (EDS) and the width and depth of the drills were measured using a laser based Profilometer. Data from the profilometer was then used to calculate material removal rates. At last, the material removal rates and laser processing parameters were used to develop a statistical model based on Design of Experiments (DOE) approach to predict the optimal laser drilling parameters. The main outcome of the study based on the laser drilled cavities was that as the number of laser pulses increases, the depth and diameter of the cavities progressively increase. However, the material removal rates revealed a decrease in value at a point between 4000 and 6000 laser pulses. Therefore, based on the sequential sum of square method, a polynomial curve to the 6th power was fit to the experimental data. The predicted equation of the curve had a p-value of 0.0010 indicating statistical significance and predicted the maximum material removal rate to be 32.10 mm3/s with 95%CI [28.3,35.9] which was associated with the optimum number of laser pulses of 4820. Whereas the experimental verification of bone drilling with 4820 laser pulses yielded a material removal rate of 33.37 mm3/s. Therefore, this study found that the carbonized layer formed due to laser processing had a decreased carbon content and helped in increasing the material removal rate. Then using the experimental data, a polymetric equation to the sixth power was developed which predicted the optimized material removal rate to occur at 4820 pulses.

Effect of operating parameters on the removal of bone cement by a sawing process

Mechanical Properties Of 7-10 Mm Bone Grafts And Small Slurry Grafts In Impaction Bone Grafting

Effect of applied force and blade speed on histopathology of bone during resection by sagittal saw

Ex-vivo parametric study of laser ablation-based drilling of cortical bone

Mechanistic models to predict thrust force and torque in bone drilling: An in-vitro study validated with robot-assisted surgical drilling parameters

Bone cutting efficiency and heat generation using a traditional fluted Burr and a novel fluteless resurfacing tool

Cutting Behavior of Cortical Bone in Different Bone Osteon Cutting Angles and Depths of Cut

Influence of Mechanical Factors on the Cutting Performance of an Ultrasonic Bone Scalpel

Study on cutting force of reaming porcine bone and substitute bone

Using a patient-specific cutting guide enables identical knee osteotomies: an evaluation of accuracy on sawbones

Analytical and experimental study of effective parameters on process temperature during cortical bone drilling

Accuracy of Bone Resection in MAKO Total Knee Robotic-Assisted Surgery

Influence on marginal bone levels at implants equipped with blades aiming to control the lateral pressure on the cortical bone. An experimental study in dogs

On the importance of precision in cortical bone drilling: Integrating experimental validation and computational modeling

In vivo evaluation of machining forces, torque, and bone quality during skull bone grinding

Cutting errors in total knee replacement: assessment by computer assisted surgery

Influence of cutting force on temperature, microcracks and chip morphology during rotary ultrasonic bone drilling: An in-vitro study

Influence of a Minimally Invasive Bone Drill Cutting Parameters on Cutting Forces and Temperature

Crack propagation determined by energy release rate in cortical bone ultrasonic vibration assisted cutting

Serrated chip formation mechanism in orthogonal cutting of cortical bone at small depths of cut

Investigation Of The Effect Of Process Parameters On Bone Grinding Performance Based On On-Line Measurement Of Temperature And Force Sensors