Abstract:This study explores controlling a first- and second-generation alcoholic fermentation process with cell recycling, modeled through algebraic differential equations (DAE) with constraints. It evaluates seven controller types: PI, PID, Model Predictive Control (MPC), Neural Network Model Predictive Control (NNMPC), Mixed Model Predictive Control (MMPC), Internal Model Control (IMC), and Linear Quadratic Regulator (LQR). Results show that, while PI and PID controllers can track setpoints, they exhibit slow responses and oscillations. In contrast, MPC controllers respond faster, with both MPC and MMPC demonstrating more robust dynamics, achieving a significant reduction in Integral of the Absolute Error (IAE) across various disturbances, notably an 87% reduction in regulatory scenarios. NNMPC outperforms PI and PID but exhibits overshoot and oscillations, and lacks robustness for servo-type problems. However, MMPC showcases comparable or superior performance to MPC, surpassing other controllers in robustness, especially the IMC and LQR in the regulatory problems. NNMPC maintains a simulation time of under 4 seconds, whereas MPC incurs a computational cost 1,000 times higher. Integrating NNMPC's optimal increment as an initial estimate in MPC reduces computational time by up to 79.7%. These findings highlight the ANN's effectiveness in addressing complex control challenges, especially when integrated with MPC. MMPC offers a superior balance between accuracy, robustness, and computational efficiency, serving as a promising solution for reducing computational costs in MPC-type controllers.

Experimental implementation of an economic model predictive control for froth flotation

Experience-based Identification and Model Predictive Control for a Methanol Recovery Distillation Column

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Latent-Variable Nonlinear Model Predictive Control Strategy For A Ph Neutralization Process

Advancing Control Paradigms in Heat-Integrated Distillation Columns: An MPC Perspective

On-line implementation of nonlinear MPC: an experimental case study

Model Predictive Control (MPC) of a Countercurrent Flow Plate Heat Exchanger in a Virtual Environment

A New Model Predictive Controller with Swarm Intelligence Implemented on FPGA

Efficiency-Oriented Model Predictive Control: A Novel MPC Strategy to Optimize the Global Process Performance

FCS-MPC of Power Converters: an Event-Driven Brain Emotional Learning Approach

Steady-state Target Calculation Integrating Economic Optimization for Constrained Model Predictive Control

Predictive Control for Continuous Stirred Tank Reactors

Thermal Energy Correction Based Model Predictive Control for Fluid Catalytic Cracking Riser

Design and Comparison of Fractional-Order Controllers in Flotation Cell Banks and Flotation Columns Used in Copper Extraction Processes

Distributed Economic Model Predictive Control with Pseudo-steady State Modifier Adaptation for an Industrial Fluid Catalytic Cracking Unit

Predictive control optimization based PID control for temperature in an industrial surfactant reactor

A model-based framework for controlling activated sludge plants

Nonlinear Model Predictive Control of Fed-Batch Fermentations Using Dynamic Flux Balance Models

Control of an integrated first and second-generation continuous alcoholic fermentation process with cell recycling using model predictive control

On Applying Model Predictive Control For Distillation System Of Linear Alkylbenzene (Lab) Complex