Abstract:Current generation of industrial MPC technology has two main disadvantages: 1) it is very costly to implement and to maintain an MPC system; 2) the performance in disturbance reduction is low. To solve these two problems, an adaptive MPC technology is introduced. It consists of three modules, a Control Module, an Identification Module and a Monitor Module. It can perform various steps of an MPC project automatically and in a parallel manner. Thus, the efficiency of MPC commissioning and maintenance can be increased by a factor of 3 or more. In the MPC Control Module, an adaptive disturbance model is used to improve control performance and robustness. A prototype of the adaptive MPC system has been applied successfully to a PTA unit. Due to its simplicity and user friendliness, this technology may change the way MPC is applied and can make MPC feasible for all process industries, not just the refining/petrochemical industry. Recent tests have shown that the adaptive disturbance model can increase control performance considerably. A traditional adaptive MPC controller performs sample-wise identification and adaptation of both process models and disturbance models without monitoring the test condition and model quality. The new adaptive MPC system is very different from the traditional adaptive control: the process model is adapted on demand (when activated by the Monitor Module) where test signals are used in model identification; the disturbance model is adapted sample-wise without using test signals. We believe that this new scheme is more adequate for the control of large scale industrial processes than the traditional adaptive controller.

Distributed Economic Model Predictive Control with Pseudo-steady State Modifier Adaptation for an Industrial Fluid Catalytic Cracking Unit

Distributed Economic Model Predictive Control for an Industrial Fluid Catalytic Cracking Unit Ensuring Safe Operation

A Method to Coordination for Decentralized Multi- Mpc Controllers in Integrated Plant

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Fast Distributed MPC Based on Active Set Method.

A new adaptive MPC system

A Distributed Model Predictive Control Algorithm with the Gap Metric Output Feedback Decoupling

Economic Model Predictive Control for Achieving Offset-Free Operation Performance of Industrial Constrained Systems

Thermal Energy Correction Based Model Predictive Control for Fluid Catalytic Cracking Riser

A fast, fully distributed nonlinear model predictive control algorithm with parametric sensitivity through Jacobi iteration

Iterative Unit-based Adaptive Dynamic Programming with Application to Fluid Catalytic Cracker Unit

Distributed Model Predictive Control with Asynchronous Controller Evaluations

Self-Evolving Offset-Free Model Predictive Control with Model-Plant Mismatch for Dynamic Working-Point Change Tasks in Industrial Processes

Distributed Model Predictive Control for the Atmospheric and Vacuum Distillation Towers in A Petroleum Refining Process

Enhancing Dynamic Operation Optimization Feasibility for Constrained Economic Model Predictive Control Systems

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Data-Driven Finite Control-Set Model Predictive Control for Modular Multilevel Converter

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Dynamic Optimization Oriented Modeling and Nonlinear Model Predictive Control of the Wet Limestone FGD System

Economic Model Predictive Control of Enhanced Operation Performance for Industrial Hierarchical Systems

Efficiency-Oriented Model Predictive Control: A Novel MPC Strategy to Optimize the Global Process Performance