Abstract:In the past few decades, several robust designs dealing with disturbances in batch processes have been developed. The previous methods hold the viewpoint that all disturbances are harmful because they may drive the trajectory off the nominal optimal trajectory and lead to economic loss and safety issues. Are disturbances definitely detrimental? Actually, from the economic viewpoint, not all the disturbances are unfavorable to operating batch processes. To utilize disturbances fully for the improvement of the economic performance, disturbances are first divided into favorable and unfavorable types in this paper. An alternate feedback control (AFC) method is proposed to switch the feedback gains according to the types of disturbances, holding favorable disturbances and rejecting unfavorable disturbances. As a result, AFC will lead to an asymmetrical distribution of the trajectory. It is quite different from conventional feedback control (CFC), which rejects both favorable and unfavorable disturbances and leads to a symmetrical distribution. Second, because disturbances are the source of the variation and state errors are the combination of the previous state errors, control inputs, and disturbances, a disturbance-based feedback scheme is developed for AFC in this paper. Unlike traditional error-based feedback whose feedback gain acts on the state errors, the feedback gains of AFC act on the disturbances directly. Finally, a design combining robust economic optimization and AFC regulation is proposed for economic performance improvement and quick implementation of the regulation. The parameters of the online AFC are given by the robust economic optimization. This design can avoid the mismatch between the optimization layer and the regulating layer. Additionally, there will not be any computational burden for the novel design since the difficult and complex problem can be done offline and then AFC is implemented online using the gains generated offline. The optimality and the potential applications of the proposed integrated design are demonstrated through a typical dynamic batch reactor process.

Economic Model Predictive Control for Achieving Offset-Free Operation Performance of Industrial Constrained Systems

Economic Model Predictive Control of Enhanced Operation Performance for Industrial Hierarchical Systems

Fast Economic Nonlinear Model Predictive Control Strategy of Organic Rankine Cycle for Waste Heat Recovery: Simulation-based Studies

Linear Mismatched Model Based Offset-Free Mpc For Nonlinear Constrained Systems With Both Stochastic And Deterministic Disturbances And Its Application To Cstr

Enhancing Dynamic Operation Optimization Feasibility for Constrained Economic Model Predictive Control Systems

Get the design right, the rest is automatic: Towards an adaptive MPC controller

A Soft Constraint Adjustment Method Based on Multi-Parametric Programming in Steady-State Target Calculation for Model Predictive Control

Dynamic Modeling And Nonlinear Predictive Control Based On Partitioned Model And Nonlinear Optimization

An Event-Triggered Model Predictive Control with Exponentially Stable Offset Free for PWA Systems with Model-Plant Mismatch.

Disturbance-Based Alternate Feedback Control Scheme to Enhance Economic Performance of Batch Processes

A Survey on Offset-free Model Predictive Control

Distributed Economic Model Predictive Control for an Industrial Fluid Catalytic Cracking Unit Ensuring Safe Operation

An Optimal Load Distribution and Real-Time Control Strategy for Integrated Energy System Based on Nonlinear Model Predictive Control

Self-Evolving Offset-Free Model Predictive Control with Model-Plant Mismatch for Dynamic Working-Point Change Tasks in Industrial Processes

Distributed Economic Model Predictive Control with Pseudo-steady State Modifier Adaptation for an Industrial Fluid Catalytic Cracking Unit

Economic Model Predictive Control for Transport-Reaction Systems with Target Profiles

Offset-Free Model Predictive Control of Interleaved Boost Converter Based on Extended State Observer

Efficiency-Oriented Model Predictive Control: A Novel MPC Strategy to Optimize the Global Process Performance

Optimal IOFL-based economic model predictive control technique for boiler-turbine system

Steady-state Target Calculation Integrating Economic Optimization for Constrained Model Predictive Control

Double-layered Model Predictive Control Strategy with Dynamic Trajectory Calculation