Abstract:Most MPC (Model Predictive Control) algorithms used in industries and studied in the control academia use a two-term QP (quadratic programming), where the first term is the weighted norm of the output errors, and the second term is that of the input increments. In this work, a DMC (Dynamic Matrix Control) algorithm that uses three-term QP is developed and studied, where the third term is the weighted norm of the output increments. A relationship between the three-term DMC and the two-term DMC is established; and based on that, ideal closed-loop response curves are derived. These results are useful for the tuning of the three-term DMC. Then, a method for comparing two control methods is proposed and it is shown that the three-term DMC outperforms the two-term DMC. The findings are verified using simulation studies. Finally, the three-term DMC is successfully applied to a 1030 MW ultra-supercritical coal-fired power plant. According to simulation study using the identified model, in comparison to traditional two-term DMC, there is a roughly 10% reduction in the standard deviation of load tracking error for similar control efforts. In real-life tests on the power plant, the performance of the three-term DMC is compared to that of the existing PID controller. The load rate of change increased from 0.8%/min to 1.5%/min while the standard deviation of steam pressure decreased 38%; the standard deviations of the main steam temperature and reheat steam temperature decreased more than 40% with their mean values increased by more than 2 ∘C and 4 ∘C respectively.

Double-layered Model Predictive Control Strategy with Dynamic Trajectory Calculation

A Method to Coordination for Decentralized Multi- Mpc Controllers in Integrated Plant

Triple-Mode Model Predictive Control Using Future Target Information

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Simultaneous Optimization and Control for Polypropylene Grade Transition with Two-Layer Hierarchical Structure

Learning-Based Hierarchical Model Predictive Control for Drift Vehicles

Development of a Three-Term MPC and Its Application to an Ultra-Supercritical Coal Fired Power Plant

Multi-objective and Layered Steady-State Optimization Method of Model Predictive Control

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

The Predictive Control Of The Liquid Level Of The Pre-Fractionating Tower Of A Catalyzing Reforming Plant

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

ILC-based Two-Layer Strategy for Economic Performance Improvement in Industrial MPC Systems

Dynamic Matrix Control of a Quadruple-Tank Process

Predictive Functional Controller with A Similar Proportional Integral Optimal Regulator Structure: Comparison with Traditional Predictive Functional Controller and Application to Heavy Oil Coking Equipment

Two-layer structure strategy for large-scale systems integrating online adaptive constraints adjustment method and cooperative distributed DMC algorithm

Cooperative distributed model predictive control based on topological hierarchy decomposition

Pseudo Feedforward Dynamic Matrix Control Algorithm for Desired Closed-Loop Performance in MPC Systems

Self-Evolving Offset-Free Model Predictive Control with Model-Plant Mismatch for Dynamic Working-Point Change Tasks in Industrial Processes

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model

Dual-mode Fast DMC Algorithm for the Control of ORC Based Waste Heat Recovery System

A process-model-free method for model predictive control via a reference model-based proportional-integral-derivative controller with application to a thermal power plant