Abstract:This article proposes a new finite control set model predictive control (FCS-MPC) strategy that simultaneously evaluates two targeting control objectives including speed and currents in a single cost function, achieving high-performance single-closed-loop control structure. Besides, aiming at the calculation delay problem of the model predictive control controllers, a novel calculation delay compensation method by predicting the current variation within the delay time is proposed. In this article, an improved machine model that is especially designed for the multiobjective FCS-MPC operation is illustrated at first. Then, a new cost function that can evaluate the tracking performance of speed and d-axis current and the steady-state performance of the q-axis current is developed. Compared with the conventional FCS-MPC approaches, extra speed controllers are not needed so that the proposed control topology becomes simpler. Then, in order to tune the weighting factors for the speed and currents in the cost function, an efficient handling strategy containing two implementation procedures, state variable normalization and balance of state sensitivity to voltage alteration, is developed. Finally, a brand-new computation delay estimation and compensation technique based on the dual sampling within a control period is proposed to reduce the current and torque ripples during the control process. Comparative simulation and experiments conducted on a three-phase 1.5-kW permanent magnet synchronous machine drive system are employed to verify the effectiveness of the proposed techniques.

A New Model Predictive Controller with Swarm Intelligence Implemented on FPGA

PSO Based Model Predictive Control and Its Hardware Implementation

A Low-Cost Pole-Placement MPC Algorithm for Controlling Complex Dynamic Systems

Model Predictive Control System Based on FPGA and A Case Study

Fast Linear Parameter Varying Model Predictive Control of Buck DC-DC Converters Based on FPGA.

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Fast Nonlinear Model Predictive Control on FPGA Using Particle Swarm Optimization

FPGA implementation of nonlinear model predictive control

Model Predictive Controller Design and Implementation on FPGA with Application to Motor Servo System

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

Field Programmable Gate Array/system on a Programmable Chip-Based Implementation of Model Predictive Controller

A Custom Parallel Hardware Architecture of Nonlinear Model-Predictive Control on FPGA

Implementation of Nonlinear Model Predictive Control Based on FPGA

Implementation of Dynamic Matrix Control on Fpga

Design and Implementation of Model Predictive Controller Based on FPGA/SOPC

Embedded MPC Controller Based on Interior‐Point Method with Convergence Depth Control

Multiobjective Finite Control Set Model Predictive Control Using Novel Delay Compensation Technique for PMSM

FCS-MPC of Power Converters: an Event-Driven Brain Emotional Learning Approach

Fuzzy Predictive Control and Its Applications

Implementation of Dynamic Matrix Control on Field Programmable Gate Array

Fuzzy Approximation ARX Model-based Intelligent Two-Horizon Robust FCS-MPC for Power Converter