Abstract:Dimethyl ether (DME), derived from methanol, has been issued as an alternative to diesel and LPG. This study will continue the research of an optimized process control design for DME purification plants, specifically the methanol purification process. This way, water can be separated, and the main product, methanol, can be recycled for DME synthesis. A setpoint-based linear model of a methanol–water purification system has been developed with four controlled variables (CV) with objectives to; maintain a separated liquid water stream in the bottom stage (Stage 30) of the distillation column for methanol–water separation at 11.22%, keep the purified liquid methanol at a condenser at 58.81 °C and 49.96% of level, and the last CV is the cooler in the distillate stream, to keep the purified methanol’s top product at 40.75 °C. To complete the model, a first order plus dead time (FOPDT) disturbance model is created against the inlet temperature and flow rate of the feed, the major cause of disturbances in the industry. Using a traditional proportional integral controller connected to each controlled variable, a multi-loop control system is formed with optimization and compared to the disturbance rejection of multivariable model predictive control (MMPC). The final improvement against the feed temperature and flow for CV1, CV2, CV3, and CV4 is shown by, respectively, Integral Absolute Error (IAE) values of 79.49%, 99.90%, 100%, and 99.99% and Integral Square Error (ISE) values of 97.1%, 100%, 99.99%, and 100%.

Advancing Control Paradigms in Heat-Integrated Distillation Columns: An MPC Perspective

Experience-based Identification and Model Predictive Control for a Methanol Recovery Distillation Column

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Development of Extended Generic Model Control for High-Purity Heat Integrated Distillation Column Using Online Concentration Estimation

Dynamics and Control of High Purity Heat Integrated Distillation Columns

Model Predictive Control Based On Experience Model For The S-Trioxane Concentration Column

Dynamics and Control Designs for Internal Thermally Coupled Distillation Columns with Different Purities, Part 2: Close Loop Analysis and Control Designs

Control Schemes of Internal Thermally Coupled Distillation Columns for Non-Ideal Mixtures

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

Empirical Modelling and Advanced Control of an Industrial Distillation Column

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Dynamic Behaviors and Nonlinear Wave Model Control of Heat Integrated Air Separation Columns with Different Purities

Adaptive Temperature Control for Distillation Columns Based on Relative Stability in the Profile Pattern

Dynamic Behaviours and Control of Full Tower Heat Integrated Air Separation Columns

Temperature profile movement investigation and application to a control scheme with corrected set-point for a heat integrated distillation column

Design and control of an ideal heat-integrated distillation column (ideal HIDiC) system separating a close-boiling ternary mixture

Modeling, Control, and Optimization of Ideal Internal Thermally Coupled Distillation Columns

On Applying Model Predictive Control For Distillation System Of Linear Alkylbenzene (Lab) Complex

Methanol–Water Purification Control Using Multi-Loop PI Controllers Based on Linear Set Point and Disturbance Models

Proportional-Integral Control and ARX-based Model Predictive Control for Extractive Dividing Wall Column