Abstract:An amplifier-less continuous-time analog-to-digital converter consisting of only passives, comparators, and inverters is presented. Beyond simplicity, the architecture displays significant robustness properties with respect to component variations and comparator input offsets. We give an analytical design procedure demonstrating how to parameterize the architecture to a range of signal-to-noise and bandwidth requirements and validate the procedure's accuracy with behavioral transient simulations.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to design a continuous - time analog - to - digital converter (CT - ADC) without an amplifier in order to overcome the problems of high power consumption and the need for a high supply voltage brought by amplifiers in existing CT - ADCs. Specifically, the author proposes an RC - chain CT - ADC (RC - chain ADC) composed only of passive components, comparators, and inverters. This new architecture not only simplifies the design but also shows significant robustness to component variations and comparator input offsets.
### Main problems
1. **Power consumption reduction**: Traditional CT - ADCs rely on operational amplifiers or transconductance amplifiers to achieve internal continuous - time filtering. These amplifiers are often the most power - consuming components and require a relatively high supply voltage. Therefore, reducing or eliminating the use of amplifiers can significantly reduce power consumption.
2. **Improved robustness**: The newly proposed RC - chain ADC shows good robustness in the face of component variations and comparator input offsets, which makes it more reliable in practical applications.
3. **Simplified design**: By using simple passive components and a digital feedback loop, the design of the RC - chain ADC becomes simpler and easier to implement.
### Solutions
The paper proposes a brand - new CT - ADC architecture - RC - chain ADC, which has the following characteristics:
- **Simple structure**: It is composed only of resistors, capacitors, comparators, and inverters, without amplifiers.
- **Strong robustness**: It has strong robustness to component variations and comparator input offsets.
- **Parametric design**: It provides an analytical design method that can parametrically configure the architecture according to the signal - to - noise ratio (SNR) and bandwidth requirements, and the accuracy of this method has been verified by behavioral transient simulation.
### Mathematical formulas
To ensure the performance of the system, some key formulas are derived in the paper:
1. **SNR approximation formula**:
\[
\text{SNR} \approx \epsilon \cdot \left( \delta^{2N} \int_0^{\omega_B} \frac{1}{|G(\omega)|^2} d\omega \right)^{-1}
\]
where,
\[
|G(\omega)| = \left| \det \begin{pmatrix}
j\omega\tau + \xi_1 & -\frac{1}{\tau} & 0 & \cdots & 0 \\
-\frac{1}{\tau} & j\omega\tau + \xi_2 & -\frac{1}{\tau} & \cdots & 0 \\
\vdots & \vdots & \vdots & \ddots & \vdots \\
0 & 0 & 0 & \cdots & j\omega\tau + \xi_N
\end{pmatrix} \right|^{-1}
\]
\(\xi_\ell = \kappa_\ell + 2\) (except \(\xi_N = \kappa_N + 1\)), \(\tau = RC\) is the time constant, and \(\epsilon\) is a proportional constant related to the statistical characteristics of \(v_{xN}\).
2. **Voltage swing conditions**:
\[
\kappa_\ell = \delta^{\ell - 1} \left( \frac{1 + \delta^2 - \delta}{\delta} \right)
\]
\[
\tau = \frac{\pi (2(1 + \delta^2) - \delta)}{\delta \omega_B \text{OSR}}
\]
These formulas help determine the selection of system parameters to ensure that they meet specific requirements.