Abstract:Under accident conditions, the sustained high temperature and high pressure (HTHP) environment within the containment structure poses a threat to the penetration seals. This study integrates finite element analysis of the mechanical properties of O-ring, both hyperelastic and viscoelastic characteristics, and an interfacial leakage model to predict the variation in O-ring leakage rates over time in HTHP environments. A series of leakage test experiments are conducted to validate the predictive model, indicating good agreement between experimental and predicted values. The effects of HTHP on non-aged O-rings (short-term service) are analyzed through mechanical simulations and leakage rate calculations. The results reveal that high temperatures positively and reversibly affect the O-ring seals, with hazardous conditions mainly resulting from over-pressurization. However, during the long-term service of aged O-rings, thermal aging caused by high temperatures significantly influences leakage rates. The thermal aging coupled with high pressure can cause material damage (such as rubber being squeezed out) and functional failures (excessive leakage rates). The long-term leakage rates of O-rings at high temperatures in further investigation exhibits a time–temperature equivalence. The master curve is plotted to derive an equation that describes the relationship between leakage rates, temperature, and time under specific pressure conditions. The equation indicates that the dimensionless leakage rate serves as an indicator of seal degradation and enables the quantitative evaluation of the long-term service life of the O-rings using the maximum allowable leakage rate. These findings are applicable within the range of accidental operating conditions for containment structures, including temperatures up to 160 °C and pressures up to 0.75 MPa.

Leakage analysis and ground tests of the O-type rubber ring seal applied in lunar sample return devices

Research on Sealing Structure and Ground Test of Lunar Sample Return Devices

Leakage Analysis and Ground Tests of Knife Edge Indium Seal to Lunar Sample Return Devices

Review on Hydrogen-Induced Failure of Rubber O-Rings for High Pressure Hydrogen Storage Tanks

Sealing Performance Analysis of Deep-Sea Sediment Sampler

Macroscopical contact pressure and microscopic leakage performance analysis of rubber seal considering thermal oxygen aging effect

EXPERIMENTAL REASEARCH ON LEAKAGE RATE OF SPACE SEAL WITH O-RING

Experimental Investigation on Mechanical Property of Metal Rubber Used in Lunar Lander in High or Low Temperature

Air, Helium and Water Leakage in Rubber O-ring Seals with Application to Syringes

A review of encapsulation techniques for planetary samples

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

On the Use of Foam Rubber for Sealing Applications

Analysis of material fault of O-ring seal in aircraft cylinder

Characterization of long-term evolution of leakage rates of O-ring seals in nuclear power plant under high-temperature and high-pressure conditions

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

The State of the Art of Rubber-Seal Technology

Experimental investigation of elastomers in downhole seal elements: Implications for safety

Numerical Investigations of Leakage Performance Degradations in Labyrinth and Flexible Seals Due to Wear

Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method

Sealing Failure Analysis on V-Shaped Sealing Rings of an Inserted Sealing Tool Used for Multistage Fracturing Processes

Analysis of O-Ring Seal Failure under Static Conditions and Determination of End-of-Lifetime Criterion