Abstract:The precise characterization and measurement of new nanomaterials and nano devices require in situ SEM nanorobotic instrumentation systems, which put forward further technical requirements on nanopositioning techniques of compact structure, cross-scale, nanometer accuracy, high vacuum and non-magnetic environment compatibility, etc. In this work, a novel cross-scale nanopositioning stage was proposed, which combined the advantages of piezoelectric stick-slip positioner and piezoelectric scanner techniques and adopted the idea of macro/micro positioning. A new structure design of a single flexible hinge shared by a small and large PZT was proposed to effectively reduce the size of the positioning stage and achieve millimeter stroke and nanometer motion positioning accuracy. Then, the cross-scale motion generation mechanism of the dual piezoelectric stick-slip drive was studied, the system-level dynamics model of the proposed positioning stages was constructed, and the mechanism design was optimized. Further, a prototype was manufactured and a series of experiments were carried out to test the performance of the stage. The results show that the proposed positioning stage has a maximum motion range of 20 mm and minimum step length of 70 nm under the small piezoceramic ceramic macro-motion stepping mode, and a maximum scanning range of 4.9 μm and motion resolution of 16 nm under the large piezoceramic ceramic micro-motion scanning mode. Moreover, the proposed stage has a compact structure size of 30 × 17 × 8 mm3, with a maximum motion speed of 10 mm/s and maximum load of 2 kg. The experimental results confirm the feasibility of the proposed stage, and nanometer positioning resolution, high accuracy, high speed, and a large travel range were achieved, which demonstrates that the proposed stage has significant performance and potential for many in situ SEM nanorobotic instrument systems.

A compact inertial nano-positioner operating at cryogenic temperatures

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Superconducting Noncontact Device for Precision Positioning in Cryogenic Environments

Low-cost, open-source XYZ nanopositioner for high-precision analytical applications

A Cryogenic Near-Field Microscope Working At Ln Temperature

A Novel Inertial Micro-Actuator and Its Application in Positioning Mechanism

Low temperature and high magnetic field performance of a commercial piezo-actuator probed $via$ laser interferometry

A subKelvin scanning probe microscope for the electronic spectroscopy of an individual nano-device

A 3-DOF piezoelectric driven nanopositioner: Design, control and experiment

A Portable Miniature Cryogenic Environment for in Situ Neutron Diffraction

Cryogenic optical beam steering for superconducting device calibration

An Ultra-High-Vacuum Rotating Sample Manipulator with Cryogenic Cooling

A New Positioning and Loading System for the Study of the Mechanical Behavior of Small and Micro Components

Characterization of Two Fast-Turnaround Dry Dilution Refrigerators for Scanning Probe Microscopy

Combined Raman spectroscopy and electrical transport measurements in ultra-high vacuum down to 3.7 K

An In-Situ Movable Calibration Source for Cryogenic Particle Detectors

A Novel Monopolar Cross-Scale Nanopositioning Stage Based on Dual Piezoelectric Stick-Slip Driving Principle

Piezo-driven Sample Rotation System with Ultra-Low Electron Temperature

Improving Resolution and Run Outs of a Superconducting Noncontact Device for Precision Positioning

Development of a load frame for neutron diffraction and fluorescent thermometry at cryogenic temperature

Development of a near-5-Kelvin, cryogen-free, pulse-tube refrigerator-based scanning probe microscope