Abstract:The fabrication of self-shunted SNS (superconductor/normalconductor/superconductor) Josephson junctions for rapid single flux quantum (RSFQ) logic could potentially facilitate increased circuit density, as well as reduced parasitic capacitance and inductance over the currently used externally shunted SIS (superconductor/insulator/superconductor) trilayer junction process. We report the deposition, fabrication, and device characterization of Josephson junctions prepared with Nb1-yTiyN electrodes and TaxN barriers tuned near the metal - insulator transition, deposited on practical large-area oxide-buffered silicon wafers. When scaled to practical device dimensions, this type of junction is found to have an IcRn product of over 0.5 mV and a critical current (I-c) and normal resistance (R-n) of magnitudes suitable for single flux quantum digital circuits. A longer than expected normal-metal coherence length (xi(n)) of 5.8 nm is inferred from the thickness dependence of J(c) at 4.2 K for junctions fabricated using a barrier resistivity of 13 m Omega cm. Although not well understood and not quantitatively predicted by conventional theories, this results in a sufficiently high I-c and IcRn to make the junctions suitable for practical applications. Similar observations of unexpectedly large Josephson coupling currents in SNS junctions have been documented in other systems, particularly in cases when the barrier is near the M - I transition, and have become known as the giant proximity effect. The temperature dependence of xi(n), I-c R-n, and J(c) are also reported. For this technology to be used in practical applications, significant improvements in our fabrication process are needed as we observe large variations in I-c and R-n values across a 100 mm wafer, presumably as a result of variations in the Ta: N stoichiometry and the resulting changes in the TaxN barrier resistivity.

Modeling flux-quantizing Josephson junction circuits in Keysight ADS

Reciprocal lumped-element superconducting circuits: quantization, decomposition, and model extraction

Modeling of TSV-based Solenoid Inductors for 3-D Integration

Simulation of ﬂux-pumped Josephson parametric ampliﬁer with a detailed SQUID model using harmonic balance method

Simulation of a flux-pumped Josephson parametric amplifier with a detailed SQUID model using the harmonic balance method

Modeling flux tunability in Josephson Traveling Wave Parametric Amplifiers with an open-source frequency-domain simulator

An Electromagnetic-Flux-Distribution Model for the Analyses of Superconducting Josephson Junction Circuits and Quantum Phase-Slip Junction Circuits

Spectroscopy Of Superconducting Charge Qubits Coupled By A Josephson Inductance

A general flux-Based Circuit Theory for Superconducting Josephson Junction Circuits

Hybridized Solid-State Qubit in the Charge-Flux Regime

Gate-controlled near-surface Josephson junctions

Geometric Superinductance Qubits: Controlling Phase Delocalization across a Single Josephson Junction

Efficiently Building and Characterizing Electromagnetic Models of Multi-Qubit Superconducting Circuits

Magnetic-Flux-Flow Diagrams for Design and Analysis of Josephson Junction Circuits

Implementing Josephson Junction spectroscopy in a scanning tunneling microscope

Quantum dynamics of superconductor-quantum dot-superconductor Josephson junctions

Modeling Bias Current Flows in SQAs in the Presence of Magnetic Fields

Advanced FLUXONICS Process CJ2 Based on Sub-μm-Sized Cross-Type Nb/AlO x /Nb Josephson Junctions for Mixed Signal Circuits

Internally shunted Josephson junctions with barriers tuned near the metal–insulator transition for RSFQ logic applications

Modelling Realistic Multi-layer devices for superconducting quantum electronic circuits

Fluxons in Long and Annular Intrinsic Josephson Junction Stacks