Abstract:Circuit QED based quantum information processing relies on low noise amplification for signal readout. In the realm of microwave superconducting circuits, this amplification is often achieved via Josephson parametric amplifiers (JPA). In the past, these amplifiers exhibited low power added efficiency (PAE), which is roughly the fraction of pump power that is converted to output signal power. This is increasingly relevant because recent attempts to build high saturation power amplifiers achieve this at the cost of very low PAE, which in turn puts a high heat load on the cryostat and limits the number of these devices that a dilution refrigerator can host. Here, we numerically investigate upper bounds on PAE. We focus on a class of parametric amplifiers that consists of a capacitor shunted by a nonlinear inductive block. We first set a benchmark for this class of amplifiers by considering nonlinear blocks described by an arbitrary polynomial current-phase relation. Next, we propose two circuit implementations of the nonlinear block. Finally, we investigate chaining polynomial amplifiers. We find that while amplifiers with higher gain have a lower PAE, regardless of the gain there is considerable room to improve as compared to state of the art devices. For example, for a phase-sensitive amplifier with a power gain of 20 dB, the PAE is ~0.1% for typical JPAs, 5.9% for our simpler circuit JPAs, 34% for our more complex circuit JPAs, 48% for our arbitrary polynomial amplifiers, and at least 95% for our chained amplifiers.

Simulation of ﬂux-pumped Josephson parametric ampliﬁer with a detailed SQUID model using harmonic balance method

Simulation of a flux-pumped Josephson parametric amplifier with a detailed SQUID model using the harmonic balance method

Flux-driven Josephson parametric amplifiers: Hysteretic flux response and nondegenerate gain measurements

Multiphysics Numerical Method for Modeling Josephson Traveling-Wave Parametric Amplifiers

Modeling and Harmonic Balance Analysis of Parametric Amplifiers for Qubit Read-out

Modeling flux tunability in Josephson Traveling Wave Parametric Amplifiers with an open-source frequency-domain simulator

Fabrication and Characterization of Ultra-Low Noise Narrow and Wide Band Josephson Parametric Amplifiers

A three-dimensional Josephson parametric amplifier

Pump-efficient Josephson parametric amplifiers with high saturation power

Modeling flux-quantizing Josephson junction circuits in Keysight ADS

Numerical simulations of Josephson Traveling Wave Parametric Amplifiers (JTWPAs): comparative study of open-source tools

Systematic Approach for Tuning Flux-driven Josephson Parametric Amplifiers for Stochastic Small Signals

Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers

High-gain weakly nonlinear flux-modulated Josephson parametric amplifier using a SQUID-array

Parameter optimization of Josephson parametric amplifiers using a heuristic search algorithm for axion haloscope search

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Broadband CPW-based impedance-transformed Josephson parametric amplifier

Four-channel System for Characterization of Josephson Parametric Amplifiers

Optimizing the pump coupling for a three-wave mixing Josephson parametric amplifier

Parametric Amplifiers Based on Quantum Dots