Abstract:The Inner Tracking System (ITS) of the ALICE experiment will be upgraded during the second long LHC shutdown in $\mathrm{2019}-\mathrm{2020}$. The main goal of the ALICE ITS Upgrade is to enable high precision measurements of low - momentum particles (< 1 GeV/c) by acquiring a large sample of events, benefiting from the increase of the LHC instantaneous luminosity of $\mathrm{Pb}-\mathrm{Pb}$ collisions to $\mathcal{L} = 6 \cdot 10^{27} cm^{-2} s^{-1} $ during Run 3. Working in this direction the ITS upgrade project is focusing on the increase of the readout rate, on the improvement of the impact parameter resolution, as well as on the improvement of the tracking efficiency and the position resolution. The major setup modification is the substitution of the current ITS with seven layers of silicon pixel detectors. The ALPIDE chip, a CMOS Monolithic Active Pixel Sensor (MAPS), was developed for this purpose and offers a spatial resolution of 5 $\mu$m. The use of MAPS together with a stringent mechanical design allows for the reduction of the material budget down to 0.35% $X_0$ for the innermost layers and 1% $X_0$ for the outer layers. The detector design was validated during the research and development period through a variety of tests ensuring the proper operation for the full lifetime inside ALICE. The production phase is close to completion with all the new assembled components undergoing different tests that aim to characterize the modules and staves and determine their qualification level. This contribution describes the detector design, the measurements performed during the research and development phase, as well as the production status.

ALICE ITS3: how to integrate a large dimension MAPS sensor in a bent configuration detector

ALICE ITS 3: the first truly cylindrical inner tracker

ALICE ITS3: a bent stitched MAPS-based vertex detector

Applications of CMOS technology at the ALICE experiment

ITS3: A truly cylindrical inner tracker for ALICE

The ITS3 detector and physics reach of the LS3 ALICE Upgrade

Characterization results of MAPS digital prototypes for the ALICE ITS3

First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

The ALICE 3 detector concept for LHC Runs 5 and 6 and its physics performance

Heavy Flavour measurements in Pb$-$Pb collisions with the upgraded ALICE Inner Tracking System

ALICE 3: a next-generation heavy-ion detector for LHC Run 5 and beyond

Commissioning of the new ALICE Inner Tracking System

Design and characterization of novel monolithic pixel sensors for the ALICE ITS upgrade

The upgrade of the ALICE Inner Tracking System

Upgrade of the ALICE Inner Tracking System

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Measurements and simulations of MAPS (Monolithic Active Pixel Sensors) response to charged particles - a study towards a vertex detector at the ILC

Upgrading the Inner Tracking System and the Time Projection Chamber of ALICE

Data transmission architecture of the ALICE ITS3 stitched sensor prototype MOSAIX