Abstract:The Circular Electron Positron Collider (CEPC) is proposed as a Higgs factory to produce adequate events, which are the basis for high-precision measurements of the Higgs boson. The vertex detector in the CEPC should meet the requirements of a low material budget, high spatial resolution, fast readout speed and low power consumption. A monolithic active pixel sensor (MAPS) has been selected as the most promising technology for the vertex detector. The MIC4 sensor is the first prototype developed within the preliminary R&D activities of the CEPC vertex detector. It has been implemented in the TowerJazz 180 nm CMOS image sensor (CIS) process. It measures 3.1 mm x 4.6 mm and features a 128 row x 64 column pixel array with a pixel pitch of 25 mu m. In this work, a binary front-end has been designed for a compact pixel combined with a sparsified readout circuitry. Each pixel is composed of an amplifier, a shaper, a discriminator and digital logic. A new asynchronous zero-suppression data-driven readout circuit architecture is proposed and implemented in MIC4. We have performed some initial tests on this chip and obtained detailed results. The front-end features a peaking time below 1 mu s, a shaping time less than 3 mu s, a charge threshold of approximately 100 e(-), an average temporal noise (TN) of 6 e(-) and a fixed pattern noise (FPN) of 36 e(-). The addresses of the fired pixels can be readout in the digital part of the chip at a clock running at 30 MHz with the new data-driven readout circuit architecture. The hit map under Fe-55 X-ray exposure shows that the sensor designed in MIC4 works well. The probability of single event latch-up (SEL) sigma(SEL) is 1.02 x 10(-6) cm(2) at a linear energy transfer (LET) of 20.05 MeV cm(2)/mg.

Measurements and simulations of MAPS (Monolithic Active Pixel Sensors) response to charged particles - a study towards a vertex detector at the ILC

Realistic Simulation of the MAPS Response

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Beam Test of a Monolithic Active Pixel Sensor for the CEPC Vertex Detector

Simulations and Performance Studies of a MAPS in 65 nm CMOS Imaging Technology

Silicon detector R$\&$D for the future Electron-Ion Collider

A Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

First Results with Prototype ISIS Devices for ILC Vertex Detector

A monolithic active pixel sensor with node-based, data-driven, parallel readout for the high energy physics experiment vertex detector

Latest vertex and tracking detector developments for the future Electron-Ion Collider

Pixel detector R&D for the Compact Linear Collider

Applications of CMOS technology at the ALICE experiment

CMOS pixel sensors optimized for large ionizing dynamic

CMOS MAPS with a Novel Readout Scheme for High Luminosity Particle Colliders

R&D for the CLIC Vertex and Tracking detectors

Development of Fast and High Precision CMOS Pixel Sensors for an ILC Vertex Detector

Depleted Fully Monolithic Active CMOS Pixel Sensors (DMAPS) in High Resistivity 150~nm Technology for LHC

Design and initial characterization of MIC4, the monolithic active pixel sensor prototype for CEPC vertex detector

Performance of the ATLASPix1 Pixel Sensor Prototype in Ams Ah18 CMOS Technology for the ATLAS ITk Upgrade

Beyond the CMOS sensors: the DoTPiX pixel concept and technology for the International Linear Collider A

Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider