Abstract:This paper describes specification and early design of back end signal processing subsystems for the Black Hole Explorer (BHEX) Very Long Baseline Interferometry (VLBI) space telescope. The "back end" consists of two subsystems. First, the block downconverter (BDC) is a heterodyne system that performs a frequency translation of the analog signal from IF to baseband and amplifies and filters it for digitization. Second, the digital back end (DBE) samples the analog signal with an analog-to-digital converters (ADC) and digitally processes the data stream formatting them to the VLBI "VDIF" standard and converting to Ethernet packets for 100 gigabit-per-second (Gb/s) Ethernet transport to the optical downlink system. Both the BDC and the DBE for BHEX support eight channels of 4.096 GHz bandwidth each, for a total processed bandwidth of 32.768 GHz. The BHEX back end benefits from mature terrestrial back end heritage, described in some detail. The BHEX back end itself is in the early stages of design, with requirements, interface specifications, and component trade studies well advanced. The aim is to build a prototype using terrestrial grade parts which are available in functionally identical space grade equivalents, and to use this prototype to advance the back end Technology Readiness Level (TRL) preparing for a Small Explorer (SMEX) proposal in 2025.

What problem does this paper attempt to address?

### What problems does this paper attempt to solve? This paper aims to describe and discuss the early design and specifications of the signal - processing subsystem at the backend of the "Black Hole Explorer" (BHEX) very long baseline interferometry (VLBI) space telescope. BHEX is a VLBI station at a wavelength of about 1 millimeter in the medium - Earth orbit (MEO). Its main objective is to discover, measure, and image the bright and narrow "photon ring" around black holes. The photon ring is a fine structure formed by light escaping after orbiting the black hole one or more times, and it is the basis of the black - hole images of M87* and SgrA* taken by the Event Horizon Telescope (EHT). To achieve this goal, BHEX needs to extend the ground - based EHT array into space, thereby doubling the baseline length to obtain the necessary resolution. However, this brings huge technical challenges, especially in signal processing. Therefore, the paper focuses on the design of the following two key subsystems: 1. **Block Downconverter (BDC)**: - This is an asynchronous system used to convert analog signals from intermediate frequency (IF) to baseband, and amplify and filter them for digitization. - BDC supports eight channels with a bandwidth of 4.096 GHz, handling a total bandwidth of 32.768 GHz. 2. **Digital Back End (DBE)**: - DBE samples analog signals using an analog - to - digital converter (ADC) and processes the data stream digitally, formats it into the VLBI - standard VDIF format, and converts it into Ethernet packets for transmission to the optical downlink system via 100 Gb/s Ethernet. - It also supports eight channels with a bandwidth of 4.096 GHz, with a total bandwidth of 32.768 GHz. In addition, the paper also emphasizes that the design of the BHEX backend system benefits from the mature ground - based backend heritage, and it details the requirements, interface specifications, and the progress of component trade - off studies. The ultimate goal is to build a prototype using ground - level components with the same functions, and through this prototype, raise the backend technology readiness level (TRL) in preparation for the Small Explorer (SMEX) proposal in 2025. ### Summary The core problem of this paper is to develop an efficient and reliable space signal - processing system to support BHEX's observation and imaging of black - hole photon rings in the medium - Earth orbit. Specifically, it solves the problem of how to process high - bandwidth, high - precision radio - astronomy signals in extreme environments such as space.

The Black Hole Explorer: Back End Electronics

The Black Hole Explorer: Instrument System Overview

The Black Hole Explorer: Preliminary Antenna Design

The Black Hole Explorer: Motivation and Vision

High Data Rate Laser Communications for the Black Hole Explorer

The Black Hole Explorer Cryocooling Instrument

The Black Hole Explorer: Operating a Hybrid Observatory

Receivers for the Black Hole Explorer (BHEX) Mission

The Japanese Vision for the Black Hole Explorer Mission

Ultra-low noise laser and optical frequency comb-based timing system for the Black Hole Explorer (BHEX) mission

Black Hole Spacetime and Properties of Accretion Flows and Jets Probed by Black Hole Explorer: Science Cases Proposed by BHEX Japan Team

The Black Hole Explorer: Using the Photon Ring to Visualize Spacetime Around the Black Hole

Reference Array and Design Consideration for the next-generation Event Horizon Telescope

Software systems for operation, control, and monitoring of the EBEX instrument

Development of TRL5 Space Qualified Hardware for Tuning, Biasing, and Readout of Kilopixel TES Bolometer Arrays

The Black Hole Explorer: Photon Ring Science, Detection and Shape Measurement

Advancing Black Hole Imaging with Space-Based Interferometry

Design and Implementation Aspects of the Sheshan 13-m Radio Telescope

Commensal, Multi-user Observations with an Ethernet-based Jansky Very Large Array

Orbital configurations of spaceborne interferometers for studying photon rings of supermassive black holes

A VLBI receiving system for the South Pole Telescope