Abstract:The Black Hole Explorer (BHEX) is a space-based very-long baseline interferometry (VLBI) mission aimed at precision black hole measurements, detecting the photon ring around black holes, exploring spacetime, spin, and mass properties, and validating predictions of General Relativity. These objectives are achieved using cryogenic receivers with quantum-limited sensitivities across a broad frequency range. Dual-band receivers at 80-106 GHz and 240-320 GHz require operating temperatures of 20 K and 4.5 K, respectively. A cryocooling system with two cold stages will be employed: a 20 K stage handling a 125 mW heat load and a 4.5 K stage handling a 10 mW heat load. To design the cryocooling system, the mission leverages existing space industry technology at high Technology Readiness Levels (TRLs), informed by missions such as Planck, JEM/SMILES, Hitomi, and XRISM, and advancements from the ACTDP/JWST program. Integrating the cryocooler with the receivers and broader instrument involves careful consideration of thermal challenges, including linking the cold ends of each cooling stage to minimize heat losses and ensuring adequate passive cooling for the cryocooler warm end heat rejection. Key challenges and trade-offs include sizing the mass and reducing power consumption while meeting the receiver cold temperature requirements, which impact the scientific objectives. This paper addresses efforts to balance the scientific requirements with the limitations of technical cryocooling capabilities within the framework of a small-class (SMEX) space mission, presenting an overview of cooling needs, initial design considerations, a survey of 4 K spaceflight cryocooler developments, and trade-offs.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop an efficient cryogenic cooling system for the "Black Hole Explorer (BHEX)" mission in order to achieve precise measurement and observation of black holes. Specifically, BHEX aims to achieve the following goals through the Space Very Long Baseline Interferometry (VLBI) technology: 1. **Detect the photon ring around black holes**: This is one of the key experiments to verify the predictions of general relativity. 2. **Explore space - time, spin and mass characteristics**: Study the basic physical properties of black holes. 3. **Improve angular resolution**: By extending the baseline of the Event Horizon Telescope (EHT) into space, achieve a higher angular resolution than ground - based observations. In order to achieve these scientific goals, BHEX needs to use cryogenic receivers, which must operate at extremely low temperatures to obtain quantum - limited sensitivity. Specifically: - The **high - frequency receivers (240 - 320 GHz)** need to operate at a temperature of 4.5 K. - The **low - frequency receivers (80 - 106 GHz)** need to operate at a temperature of 20 K. Therefore, the main problem of this paper is how to design and select an appropriate cryogenic cooling system to meet these strict temperature requirements and ensure the reliability and efficiency of the system. This includes: - **Selecting appropriate cooling techniques**: Such as Stirling cryocoolers, Joule - Thomson cryocoolers, etc. - **Optimizing the performance of the cooling system**: Ensure that sufficient cooling capacity is provided within a limited power and mass budget. - **Reducing vibration and electromagnetic interference**: Ensure that the cooling system does not have a negative impact on scientific instruments. - **Thermal management**: Ensure that the hot end of the cooling system can effectively dissipate heat and maintain within an appropriate temperature range. In summary, the core problem of this paper is to develop an efficient, reliable cryogenic cooling system for the BHEX mission that meets the requirements of NASA's Small Explorer (SMEX) mission to support its ground - breaking black - hole physics experiments.

The Black Hole Explorer Cryocooling Instrument

The Black Hole Explorer: Instrument System Overview

Receivers for the Black Hole Explorer (BHEX) Mission

The Black Hole Explorer: Back End Electronics

The Black Hole Explorer: Preliminary Antenna Design

The Black Hole Explorer: Motivation and Vision

The Black Hole Explorer: Operating a Hybrid Observatory

A Study of Mk Cooling System for Space Application

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Preliminary Design of a 4-K Mechanical Cooling System for the HUBS Mission

Temperature behavior of the 4K-class Joule Thomson cooler during the cool-down phase for space science missions

High Data Rate Laser Communications for the Black Hole Explorer

Superfluid-tight cryogenic receiver with continuous sub-Kelvin cooling for EXCLAIM

The Japanese Vision for the Black Hole Explorer Mission

Development of cryogenic system for James Webb Space Telescope

Ultra-low noise laser and optical frequency comb-based timing system for the Black Hole Explorer (BHEX) mission

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Performance of cryogenic microbolometers and calorimeters with on-chip coolers

Black Hole Spacetime and Properties of Accretion Flows and Jets Probed by Black Hole Explorer: Science Cases Proposed by BHEX Japan Team

The thermal performance model of a 105 mW@4.41 K 4 He Joule-Thomson cryocooler designed for space applications

Attaining the liquid helium temperature with a compact pulse tube cryocooler for space applications