Abstract:In the charge-coupled device (CCD)-based tracking control system of fast steering mirrors (FSMs), high control bandwidth is the most effective method to enhance closed-loop performance, which, however, usually suffers a great deal from time delay induced by a low CCD sampling rate. Moreover, mechanical resonances also limit high control bandwidth. Therefore, a tentative approach to implementing a CCD-based tracking control system for an FSM with inertial sensor-based cascade feedback is proposed, which is made up of acceleration feedback, velocity feedback, and position feedback. Accelerometers and gyroscopes are all the inertial sensors, sensing vibrations induced by platforms, in turn, which can contribute to disturbance supersession. In theory, the acceleration open-loop frequency response of the FSM includes a quadratic differential, and it is very difficult to compensate a quadratic differential with a double-integral algorithm. A lag controller is used to solve this problem and accomplish acceleration closed-loop control. The disturbance suppression of the proposed method is the product of the error attenuation of the acceleration loop, the velocity loop, and the position loop. Extensive experimental results show that the improved control mode can effectively enhance the error attenuation performance of the line of sight (LOS) for the CCD-based tracking control system. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

A compact and open-source microcontroller-based rapid auto-alignment system

A Compact and High-Precision Method for Active Beam Stabilization System

Stabilization of Laser Beam Position Based on a Closed-Loop Fast Steering Mirror System

A Novel Method to Simultaneously Measure the Straightness

Method for Active Spatial Alignment and Stabilization of Laser Beams in Multi-Beam Systems

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Airborne Laser Communication System with Automated Tracking

The Raspberry Pi Auto-aligner: Machine Learning for Automated Alignment of Laser Beams

Experimental Study on Photodiode Array Sensor Aided MEMS Fine Steering Mirror Control for Laser Communication Platforms

An Integrated Parallel Micromanipulator with Flexure Hinges for Optical Fiber Alignment

System Integration Design of High-Performance Piezo-Actuated Fast-Steering Mirror for Laser Beam Steering System

Rapid control prototyping for Al(Sc)N based highly linear quasi-static MEMS mirrors with large optical apertures

Micromanipulation robot for automatic fiber alignment

Handling Disturbance in Optical Beam Alignment Using the MPC Approach

Inertial Sensor-Based Multiloop Control of Fast Steering Mirror for Line of Sight Stabilization

Microcontroller-based locking in optics experiments

Laser Beam Pointing Stabilization Control through Disturbance Classification

Optical beam steering in laser terminals for enhanced laser communication through component interaction evaluation

Development of Active Laser Reflector for Alignment and Monitoring of Large-Scale Scientific Devices

Theoretical Model and Experimental Verification on the PID Tracking Method Using Liquid Crystal Optical Phased Array

Quasi-monolithic Compact Interferometric Sensor Head Design with Laser Auto-alignment