Color-switching hydrogels as integrated microfluidic pressure sensors

Lucie Ducloué,Md. Anamul Haque,Martyna Goral,Muhammad Ilyas,Jian Ping Gong,Anke Lindner

2024-03-04

Abstract:Precisely measuring pressure in microfluidic flows is essential for flow control, fluid characterization, and monitoring, but faces specific challenges such as \RE{achieving} sufficient resolution, non-invasiveness, or ease of use. Here, we demonstrate a fully integrated multiplexed optofluidic pressure sensor, entirely decoupled from the flow path, that enables local pressure measurements along any microfluidic channel without altering its flow geometry. The sensor itself relies on the compression of a soft mechano-actuated hydrogel, changing color in response to a pressure change. The hydrogel is separated from the fluid circulating in the channel by a thin membrane, allowing for the unrestricted use of different types of fluids. Imaging the gel through the transparent PDMS with a color camera provides a direct, easy, and contact-free determination of the fluid pressure at the sensing location for pressures as small as \SI{20}{\milli\bar} with a resolution of around \SI{10}{\milli\bar}. The sensitivity and accessible pressure range can be tuned via the mechanical properties \RE{of the sensing unit}. The photonic gel can also be used to acquire 2D pressure or deformation maps, taking advantage of the fast response time and fine spatial resolution.

Fluid Dynamics,Soft Condensed Matter

What problem does this paper attempt to address?

The paper attempts to address the challenge of accurately measuring pressure in microfluidic systems. Specifically, the authors propose a novel integrated multiplexed optofluidic pressure sensor that enables high-resolution, non-invasive, and easy-to-use local pressure measurements without altering the microchannel geometry.

### Main Issues and Challenges:
1. **High Resolution**: In microfluidic systems, high-resolution pressure measurement is required for fluid control, fluid characteristic analysis, and monitoring.
2. **Non-Invasive**: Traditional pressure sensors often affect the geometry of microchannels, altering local fluid flow and leading to inaccurate measurements.
3. **Ease of Use**: The sensor needs to be easy to use and read, facilitating experimental operations and data acquisition.
4. **Applicability**: The sensor should be applicable to various types of liquids or gases and should not be affected by liquid-gas interfaces.

### Solution:
The authors designed a pressure sensor based on soft mechanical actuation hydrogel. This hydrogel changes color when subjected to pressure, allowing for non-contact pressure measurement through optical methods (such as camera imaging). Specific features include:
- **Non-Invasive**: The hydrogel is separated from the fluid in the microchannel by a thin film, thus not altering the channel geometry.
- **High Resolution**: The sensor can measure pressures as low as 20 mbar with a resolution of about 10 mbar.
- **Multiplexed**: Multiple sensors can be integrated into the same microfluidic chip for multi-point pressure measurement.
- **Wide Applicability**: The sensor can be used for various types of liquids or gases, avoiding the impact of liquid-gas interfaces.
- **Fast Response**: The hydrogel has an ultra-fast response time and high spatial resolution, capable of detecting pressure changes within microseconds.

### Application Prospects:
This new type of pressure sensor has broad application potential in fields such as biomedicine, organ-on-chip, chemical analysis, material characterization, and water purification, especially in scenarios requiring precise control and monitoring of microfluidic systems.