Abstract:A fiber optic Mach–Zehnder interferometer (MZI) sensor based on a semi-open cavity structure for simultaneous measurement of underwater temperature and salinity has been proposed and demonstrated. The optical fiber structure consists of five segments, including single-mode fiber (SMF), offset welded, and general welded no-core fibers (NCFs). We have performed simulations and experimental validations to verify its effectiveness. Furthermore, the detailed analysis on four sensors with varying design parameters has been completed. Among four sensors, sensor-4 exhibits the highest temperature sensitivity of 1.28 nm/°C ( ${R}$ is 0.99), while sensor-3 demonstrates the highest salinity sensitivity of −3.09 nm/wt% ( ${R}$ is −0.98). By calculating and analyzing the sensitivity of temperature and salinity for different resonance peaks, the simultaneous measurement of temperature and salinity has been achieved. During a 2-h stability test, all the sensors exhibited good stability, with a maximum wavelength drift of 0.24 nm. Thereinto, sensor-4 has demonstrated a smaller wavelength drift of 0.10 nm. The salinity response time of sensor-4, when the salinity changes from 0 to 2, 4, and 6 wt%, is less than 4 s. Furthermore, the experimental results indicate that the measurement sensitivity can be enhanced by increasing the contact area between the semi-open cavity Section and the external environment. In addition, by modifying the offset distance and sensing length, the sensitivity can be further improved. The proposed sensor exhibits excellent reversibility, stability, repeatability, and rapid response characteristics. It has promising potential applications in areas, such as aquaculture, biochemical detection, and marine environment exploration.

Research on temperature sensing characteristics of fiber side-open cavity structure

Modeling Optical Microfiber Loops for Seawater Sensing.

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Optical Fiber Temperature Sensor Based on PDMS-Filled Air-Cavity Fabry–Perot Structure

High Sensitivity Temperature Sensor Based on Singlemode-No-core-singlemode Fibre Structure and Alcohol

Optical Fiber Sensor for Temperature and Salinity Based on Femtosecond Laser-Inscribed Semiopen Cavity and Waveguide

Research on Characteristics of Wedge-Shaped Open-Cavity Mach–Zehnder Sensing Structure for Seawater Temperature

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Underwater Temperature and Salinity Fiber Sensor Based on Semi-open Cavity Structure of Asymmetric MZI

High-sensitivity Temperature Sensor Based on Single-Mode Fiber for Temperature-Measurement Application in the Ocean

Study on the Temperature and Salinity Sensing Characteristics of Multifunctional Reflective Optical Fiber Probe

Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature

A Fiber Ring Cavity Laser Temperature Sensor Based on Polymer-Coated No-Core Fiber as Tunable Filter

Temperature Sensing Characteristics Based on Up-Taper and Single Mode–Multimode Fiber Structure

High-sensitivity Special Open-Cavity Mach-Zehnder Structure for Salinity Measurement Based on Etched Double-Side Hole Fiber

Theoretical and experimental characterization of a salinity and temperature sensor employing optical fiber surface plasmon resonance (SPR)

Temperature and salinity sensing characteristics of embedded core optical fiber based on surface plasmon resonance

Ultra-sensitive seawater temperature sensor using an FBG-cascaded microfiber MZI operating at dispersion turning point

High-sensitivity Salinity Sensor Based on Etched C-type Micro-Structured Fiber Sensing Structure

Strain-Insensitive Optical Fiber Sensor for Temperature and Salinity Measurement With Polynomial Surface Decoupling Algorithm

Reflective Optical Fiber Sensor Based on Dual Fabry Perot Cavities for Simultaneous Measurement of Salinity and Temperature