Abstract:A fiber optic Mach–Zehnder interferometer (MZI) sensor based on a semi-open cavity structure for simultaneous measurement of underwater temperature and salinity has been proposed and demonstrated. The optical fiber structure consists of five segments, including single-mode fiber (SMF), offset welded, and general welded no-core fibers (NCFs). We have performed simulations and experimental validations to verify its effectiveness. Furthermore, the detailed analysis on four sensors with varying design parameters has been completed. Among four sensors, sensor-4 exhibits the highest temperature sensitivity of 1.28 nm/°C ( ${R}$ is 0.99), while sensor-3 demonstrates the highest salinity sensitivity of −3.09 nm/wt% ( ${R}$ is −0.98). By calculating and analyzing the sensitivity of temperature and salinity for different resonance peaks, the simultaneous measurement of temperature and salinity has been achieved. During a 2-h stability test, all the sensors exhibited good stability, with a maximum wavelength drift of 0.24 nm. Thereinto, sensor-4 has demonstrated a smaller wavelength drift of 0.10 nm. The salinity response time of sensor-4, when the salinity changes from 0 to 2, 4, and 6 wt%, is less than 4 s. Furthermore, the experimental results indicate that the measurement sensitivity can be enhanced by increasing the contact area between the semi-open cavity Section and the external environment. In addition, by modifying the offset distance and sensing length, the sensitivity can be further improved. The proposed sensor exhibits excellent reversibility, stability, repeatability, and rapid response characteristics. It has promising potential applications in areas, such as aquaculture, biochemical detection, and marine environment exploration.

Modeling Optical Microfiber Loops for Seawater Sensing.

Microfiber Optical Sensors: A Review

Micro/nanofiber optical sensors

Theoretical study of microfiber resonator devices exploiting a phase shift

High-Resolution Optical Fiber Salinity Sensor with Self-Referenced Parallel Fabry–Perot Fiber Microcavity

Simulation of optical microfiber loop resonators for biochemical sensing

Supported Microfiber Loops for Optical Sensing.

Refractive Index Sensor Based on No-Core Fiber With Optoelectronic Oscillator Interrogation

Theoretical and experimental characterization of a salinity and temperature sensor employing optical fiber surface plasmon resonance (SPR)

High-sensitivity Salinity Measurement Sensor Based on No-Core Fiber

Strain-Insensitive Optical Fiber Sensor for Temperature and Salinity Measurement With Polynomial Surface Decoupling Algorithm

Low-Cost High Sensitivity Large Offset Mach-Zehnder Interferometer Optical Fiber Salinity Sensor with Long Sensing Area

Bended optical fiber salinity sensor with reduced temperature sensitivity

High-sensitivity Fiber Salinity Sensor Based on an Exposed-Core Microstructured Fiber Interferometer

Underwater Temperature and Salinity Fiber Sensor Based on Semi-open Cavity Structure of Asymmetric MZI

Review of Seawater Fiber Optic Salinity Sensors Based on the Refractive Index Detection Principle

High sensitive Mach–Zehnder interferometer for seawater refractive index measurement

Fiber Bragg Grating Salinity Sensor Array Based on Fiber Tapering and HF Etching

Optical steelyard: high-resolution and wide-range refractive index sensing by synergizing Fabry–Perot interferometer with metafibers

High-sensitivity Salinity Sensor Based on Etched C-type Micro-Structured Fiber Sensing Structure

Temperature and salinity sensing characteristics of embedded core optical fiber based on surface plasmon resonance