Abstract:A fiber optic Mach–Zehnder interferometer (MZI) sensor based on a semi-open cavity structure for simultaneous measurement of underwater temperature and salinity has been proposed and demonstrated. The optical fiber structure consists of five segments, including single-mode fiber (SMF), offset welded, and general welded no-core fibers (NCFs). We have performed simulations and experimental validations to verify its effectiveness. Furthermore, the detailed analysis on four sensors with varying design parameters has been completed. Among four sensors, sensor-4 exhibits the highest temperature sensitivity of 1.28 nm/°C ( ${R}$ is 0.99), while sensor-3 demonstrates the highest salinity sensitivity of −3.09 nm/wt% ( ${R}$ is −0.98). By calculating and analyzing the sensitivity of temperature and salinity for different resonance peaks, the simultaneous measurement of temperature and salinity has been achieved. During a 2-h stability test, all the sensors exhibited good stability, with a maximum wavelength drift of 0.24 nm. Thereinto, sensor-4 has demonstrated a smaller wavelength drift of 0.10 nm. The salinity response time of sensor-4, when the salinity changes from 0 to 2, 4, and 6 wt%, is less than 4 s. Furthermore, the experimental results indicate that the measurement sensitivity can be enhanced by increasing the contact area between the semi-open cavity Section and the external environment. In addition, by modifying the offset distance and sensing length, the sensitivity can be further improved. The proposed sensor exhibits excellent reversibility, stability, repeatability, and rapid response characteristics. It has promising potential applications in areas, such as aquaculture, biochemical detection, and marine environment exploration.

Bended optical fiber salinity sensor with reduced temperature sensitivity

Modeling Optical Microfiber Loops for Seawater Sensing.

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

Highly sensitive salinity sensor based on Mach-Zehnder interferometer with double-C fiber

Underwater Temperature and Salinity Fiber Sensor Based on Semi-open Cavity Structure of Asymmetric MZI

Low-Cost High Sensitivity Large Offset Mach-Zehnder Interferometer Optical Fiber Salinity Sensor with Long Sensing Area

Dual-Parameter Fiber Sensors for Salinity and Temperature Measurement Based on a Tapered PMF Incorporated With an FBG in Sagnac Loop

Strain-Insensitive Optical Fiber Sensor for Temperature and Salinity Measurement With Polynomial Surface Decoupling Algorithm

An optical fiber sensor for salinity and temperature simultaneous detection based on dual SPR effect

Highly Sensitive and Regulatable Optical Fiber Vernier Sensor Based on Two Integrated Parallel MZIs

High-Resolution Optical Fiber Salinity Sensor with Self-Referenced Parallel Fabry–Perot Fiber Microcavity

Multifunctional Optical Fiber Sensor for Simultaneous Measurement of Temperature and Salinity

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Highly sensitive salinity and temperature measurement based on tapered-SHF MZI fiber laser structure

High-sensitivity Salinity Sensor Based on Etched C-type Micro-Structured Fiber Sensing Structure

A compact multifunctional fiber sensor for simultaneous underwater measurement of salinity, temperature and strain

High-sensitivity Special Open-Cavity Mach-Zehnder Structure for Salinity Measurement Based on Etched Double-Side Hole Fiber

Reflective Optical Fiber Sensor Based on Dual Fabry Perot Cavities for Simultaneous Measurement of Salinity and Temperature

Parallel dual‐cavity fiber‐optic F‐P salinity sensor based on hollow core fiber and ceramic ferrule

Hybrid Fiber-Optic Sensor for Seawater Temperature and Salinity Simultaneous Measurements