Abstract:A fiber optic Mach–Zehnder interferometer (MZI) sensor based on a semi-open cavity structure for simultaneous measurement of underwater temperature and salinity has been proposed and demonstrated. The optical fiber structure consists of five segments, including single-mode fiber (SMF), offset welded, and general welded no-core fibers (NCFs). We have performed simulations and experimental validations to verify its effectiveness. Furthermore, the detailed analysis on four sensors with varying design parameters has been completed. Among four sensors, sensor-4 exhibits the highest temperature sensitivity of 1.28 nm/°C ( ${R}$ is 0.99), while sensor-3 demonstrates the highest salinity sensitivity of −3.09 nm/wt% ( ${R}$ is −0.98). By calculating and analyzing the sensitivity of temperature and salinity for different resonance peaks, the simultaneous measurement of temperature and salinity has been achieved. During a 2-h stability test, all the sensors exhibited good stability, with a maximum wavelength drift of 0.24 nm. Thereinto, sensor-4 has demonstrated a smaller wavelength drift of 0.10 nm. The salinity response time of sensor-4, when the salinity changes from 0 to 2, 4, and 6 wt%, is less than 4 s. Furthermore, the experimental results indicate that the measurement sensitivity can be enhanced by increasing the contact area between the semi-open cavity Section and the external environment. In addition, by modifying the offset distance and sensing length, the sensitivity can be further improved. The proposed sensor exhibits excellent reversibility, stability, repeatability, and rapid response characteristics. It has promising potential applications in areas, such as aquaculture, biochemical detection, and marine environment exploration.

High-sensitivity Fiber Salinity Sensor Based on an Exposed-Core Microstructured Fiber Interferometer

Modeling Optical Microfiber Loops for Seawater Sensing.

Highly sensitive salinity sensor based on Mach-Zehnder interferometer with double-C fiber

High-Resolution Optical Fiber Salinity Sensor with Self-Referenced Parallel Fabry–Perot Fiber Microcavity

High-sensitivity Salinity Sensor Based on Etched C-type Micro-Structured Fiber Sensing Structure

High-sensitivity Salinity Measurement Sensor Based on No-Core Fiber

Low-Cost High Sensitivity Large Offset Mach-Zehnder Interferometer Optical Fiber Salinity Sensor with Long Sensing Area

High-sensitivity Special Open-Cavity Mach-Zehnder Structure for Salinity Measurement Based on Etched Double-Side Hole Fiber

Underwater Temperature and Salinity Fiber Sensor Based on Semi-open Cavity Structure of Asymmetric MZI

Multifunctional Optical Fiber Sensor for Simultaneous Measurement of Temperature and Salinity

A Simple Integrated Interferometer for Salinity and Temperature Measurement

Simultaneous Measurement of Seawater Salinity and Temperature With Composite Fiber-Optic Interferometer

Lateral offset optical fiber modal interferometer sensor for simultaneous measurement of seawater temperature and salinity

High-Sensitivity Salinity Sensor Realized with Photonic Crystal Fiber Sagnac Interferometer

Simultaneous measurement of temperature and salinity based on hole-assisted dual-core fiber

Study on the Temperature and Salinity Sensing Characteristics of Multifunctional Reflective Optical Fiber Probe

Strain-Insensitive Optical Fiber Sensor for Temperature and Salinity Measurement With Polynomial Surface Decoupling Algorithm

High-sensitivity optical fiber SPR sensor with cascaded biconical fiber and hetero-core structure for simultaneous measurement of seawater salinity and temperature

Temperature-independent Fiber Salinity Sensor Based on Fabry-Perot Interference.

Reflective Optical Fiber Sensor Based on Dual Fabry Perot Cavities for Simultaneous Measurement of Salinity and Temperature

Seawater temperature and salinity sensing based on in-fiber Michelson-Fabry-Perrot hybrid interferometer employing frequency domain decomposition method