Probe-Type Multi-Core Fiber Optic Sensor for Simultaneous Measurement of Seawater Salinity, Pressure, and Temperature

Chengcheng Feng,Hao Niu,Hongye Wang,Donghui Wang,Liuxia Wei,Tao Ju,Libo Yuan
DOI: https://doi.org/10.3390/s24061766
IF: 3.9
2024-03-09
Sensors
Abstract:In this article, we propose and demonstrate a probe-type multi-core fiber (MCF) sensor for the multi-parameter measurement of seawater. The sensor comprises an MCF and two capillary optical fibers (COFs) with distinct inner diameters, in which a 45° symmetric core reflection (SCR) structure and a step-like inner diameter capillary (SIDC) structure filled with polydimethylsiloxane (PDMS) are fabricated at the fiber end. The sensor is equipped with three channels for different measurements. The surface plasmon resonance (SPR) channel (CHSPR) based on the side-polished MCF is utilized for salinity measurement. The fiber end air cavity, forming the Fabry–Pérot interference (FPI) channel (CHFPI), is utilized for pressure and temperature measurement. Additionally, the fiber Bragg grating (FBG) channel (CHFBG), which is inscribed in the central core, serves as temperature compensation for the measurement results. By combining three sensing principles with space division multiplexing (SDM) technology, the sensor overcomes the common challenges faced by multi-parameter sensors, such as channel crosstalk and signal demodulation difficulties. The experimental results indicate that the sensor has sensitivities of 0.36 nm/‰, −10.62 nm/MPa, and −0.19 nm/°C for salinity, pressure, and temperature, respectively. As a highly integrated and easily demodulated probe-type optical fiber sensor, it can serve as a valuable reference for the development of multi-parameter fiber optic sensors.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
### Problems Addressed by the Paper This paper proposes and demonstrates a probe-type multi-core fiber (MCF) sensor for simultaneously measuring seawater salinity, pressure, and temperature. Specifically, the sensor consists of an MCF and two capillary optical fibers (COF) with different inner diameters. At the fiber end, a 45° symmetrical core reflection (SCR) structure and a stepped inner diameter capillary (SIDC) structure are prepared and filled with polydimethylsiloxane (PDMS). By combining three different sensing principles (surface plasmon resonance (SPR), Fabry-Perot interferometry (FPI), and fiber Bragg grating (FBG)), the sensor overcomes common issues of multi-parameter sensors such as channel crosstalk and signal demodulation difficulties. - **Salinity Measurement**: The SPR channel (CH SPR) based on side-polished MCF is used for measuring salinity. - **Pressure and Temperature Measurement**: The FPI channel (CH FPI) formed at the fiber end is used for measuring pressure and temperature. - **Temperature Compensation**: The FBG channel (CH FBG) located in the central core is used for temperature compensation. Experimental results show that the sensor has sensitivities of 0.36 nm/‰ for salinity, −10.62 nm/MPa for pressure, and −0.19 nm/°C for temperature. As a highly integrated and easily demodulated probe-type fiber sensor, it has broad application prospects in multi-parameter measurements in shallow seawater, tidal estuaries, and saline lakes.