Abstract:Spinel-structured lithium nickel manganese oxide (LiNi0.5M1.5O4, LNMO) is a low-cost battery cathode material with a high operating voltage (similar to 4.7 V vs Li+/Li), relatively high capacity (similar to 147 mA h g(-1)), and good rate performance. Previous studies have suggested that large particle size, single-crystal-like morphology, and high phase purity are favorable for achieving good electrochemical performance. However, simultaneous control over these properties is difficult for conventional solid-state synthesis at high temperatures. Here, we report a molten-salt-assisted method to prepare large-size (median grain size D-50 = 16.8 mu m) single-crystal LNMO with molten lithium molybdate (Li2MoO4) serving as the medium of ion diffusion and crystal growth. In situ X-ray diffraction (XRD) studies of the material preparation process reveal structural disorder and formation of the rock-salt impurity phase at high temperatures, which are reverted upon cooling. The correlations between the cooling rate and structural ordering/phase purity at the single-particle level are further studied using correlative scanning electron microscopy and Raman spectroscopy (SEM-Raman) techniques. SEM-Raman studies for the first time reveal that the Ni-rich rock-salt impurity phase actually exists at the interior of the large-size LNMO particles, which is difficult to be detected by conventional XRD or Raman spectroscopy because of limitations in probing depth. We further confirm that slow cooling is the key to increasing structural ordering and enhancing electrochemical performance of LNMO. The optimized LNMO sample shows excellent cycle performance by retaining similar to 85% initial capacity after 300 charge-discharge cycles and acceptable level of rate capability despite its large particle size. Our results highlight the importance of mechanistic studies into material synthesis, which provide the basis for designing better materials and more efficient preparation methods.

Li-cycling properties of molten salt method prepared nano/submicrometer and micrometer-sized CuO for lithium batteries

Thermal Oxidation Synthesis of CuO/Cu Anode Materials and the Structure and Electrochemical Properties

Solvothermal synthesis of micro-/nanoscale Cu/Li 4 Ti 5 O 12 composites for high rate Li-ion batteries

Molten salts synthesis of Li1.1Mn0.55Ni0.3Co0.05O2 oxide cathode material for lithium-ion batteries

Molten Salt Synthesis and High-Performance of Nanocrystalline Li-rich Cathode Materials

Morphology- and Facet-Controlled Synthesis of CuO Micro/nanomaterials and Analysis of Their Lithium Ion Storage Properties

Synthesis Conditions Of Limn2o4 Prepared By Molten Salt Method

Performance Optimization of Li1+X(Ni0.15co0.15mn0.70)O2.275+X/2 by Post Molten Salt Treatment As Cathode Material for Li-Ion Batteries

Controlled synthesis of CoO/C and Co/C nanocomposites via a molten salt method and their lithium-storage properties

Facile Synthesis of Cuo Nanorod for Lithium Storage Application

The Enhanced Electrochemical Performance of Nanocrystalline Li[Li 0.26 Ni 0.11 Mn 0.63 ]O 2 Synthesized by the Molten-Salt Method for Li-ion batteries

A facile eutectic mixed molten salt method for synthesizing LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Solid-State Construction of CuO-Cu2O@C with Synergistic Effects of Pseudocapacity and Carbon Coating for Enhanced Electrochemical Lithium Storage

Facile solvothermal synthesis of phase-pure Cu 4O 3 microspheres and their lithium storage properties

Hollow spherical 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 prepared by facile molten salt method for enhanced long-cycle and rate capability of lithium-ion batteries

Synthesis of Sheaf-Like CuO from Aqueous Solution and Their Application in Lithium-Ion Batteries

Synthesis of mesoporous copper oxide microspheres with different surface areas and their lithium storage properties

Controlling Particle Size and Phase Purity of "Single-Crystal" LiNi0.5Mn1.5O4 in Molten-Salt-Assisted Synthesis

Preparation and electrochemical performances of cubic shape Cu2O as anode material for lithium ion batteries

Morphology and Electrochemical Performance of Li[Li0.2mn0.54ni0.13co0.13]O-2 Cathode Materials Treated in Molten Salts

Synthesis of nanobelt-tangled spheroids of copper (II) oxide at room temperature and their application for lithium-ion batteries